bin problems????
#1
bin problems????
can someone please take a look at this for me and see if im missing anything.it show soild cel and wont go past 3500.i took off the checksum but still nuttin.maybe someone sees something on it i dont.its a crome bin
#5
Re: bin problems????
Originally Posted by zccr-xsi
i dont know why the pa sesor is disabled i didnt build the bin a buddy did.evrytime we strat the car it throws soild cel and wont go past 3k.i cant figure out why its going into limp mode.
#6
Re: bin problems????
i dont know if that could be the problem.. when i first started my build i was running a jdm pm6 with TE and it kept giving me a code for the injectors and the atmospheric pressure sensor but mine would rev and go into boost fine.. sounds more like an ecu problem to me..but either way do what the guys above said and then youll know for sure
#7
Re: bin problems????
well check this out. i had 3 differant chips burnt.i tried all of them and nuttin worked. one was even a stock gsr bin they all showed soild cel and put ecu in limp mode.now when i put the old chip that came out of it back in it seems to run fine.this ecu wasnt the ecu we had for this car.we took it to someone to have them install valves and springs.well when we got it back and i opened the ecu i noctied he had a diff socket in there.(didnt have the lever on it) and the ecu we had before had a blue socket in it.so them bitches swicthed out ecu on us and didnt say a word about it.so i bet they took the good ecu and gave us a shitty as chipped one.i mean that socket even looks cheap as ----.all this is done with a delsol with b18 gsr motor.the sticker for the ecu was t aken off,but the clips on the inside say pr3 i think they fucked us on this ecu deal.any ideals on what i can do to fix this dude ecu?
Thread
Thread Starter
Forum
Replies
Last Post