BIN file depository (TE, Uberdata, Crome, etc)
 

I have created a spot where BIN files can be uploaded and downloaded on my site.

Please understand people will try these BINs out so please only post working BIN files that are at least moderately tuned to dyno tuned. Post ALL details that you know about the file you are uploading (ECU, engine, turbo, fuel pressure, injectors, fuel pump, any special features enabled, etc)

To those leeches who will only download, you suck!

Now, those of you who have been around for a while, get to uploading good BINs!!!

http://www.-------------/bins

***Disclaimer: Don't download anything if you don't know what you are doing. Try to sue me for hosting them and you can go ---- yourself. Try to sue anyone who posted a BIN file and I'll shove a broken broomstick up your ass. DO NOT post anything except for KNOWN WORKING BIN FILES or I will come find you.

That is all.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

could some uplaod a bin for me
i am running a n/a d16z6 w/ all the bolt ons.i am runnig turboedit on a obd0 pm6.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Bahaha, now instead of people asking for bins for this setup with this turbo they are going to be asking for people to upload bins for this setup and this turbo. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

That's ------- gay! If its not there, dont be an ass...make one yourself. (And then post it up)

This site isnt there to appease the noobies...its for organizational purposes only.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

im going to upload mine xenocron as soon as my ---- gets tuned. ill let you know.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I have been running TurboEdit with the 3bar for a week or so. It seems to get rid of the boost cut problem I was having. I still need to get the car on the dyno before I would post up any bins, but it is running pretty strong under boost. ;D

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Its funny how there isn't many in there yet. POST EM UP BITCHES!

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

It's like a sperm bank for .bin files. I have a few i'l try and donate ;) Working on more as we speak so there will be more later on after their dyno'd.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I like that!

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

xenocron... why don't u sticky this to the top since its "kinda important"... people may want this in the future and searching for it with our search engine would be impossible.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I stickied this and now no one is adding... :-\

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

give it time? =x some peopel dont really wanna post there "basemaps" cuz there not even "safe" really? i dunno. im sad to, i keep checkin back but nothings here

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I'm working on another one. Just need to datalog it all, but that won't happen until my CABLE gets here!!!! >:(

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

here =x i kno its not our deposite but its A deposite for those who need it... maybe if we DL them and put it in our deposite

http://www.ecimulti.org/uberdata/for...y;threadid=154

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Thanks to Semnos for uploading that D15 bin. It seems to be pretty damn good on my D16. The idle is a bit fuxored, but I can deal with a rough idle if the rest of it is this good.

Why aren't more people uploading bins? :(

As soon as I get a WB on this thing I'll be uploading.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

xenocron you should post your bin

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I figure people know where to get my bin off the uberdata site, but I just uploaded my latest bin anyways.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I tried that turbo d16a1 one and it pings liek crazy. :(
the timing seems agressive. Same with the d15boost bin, it pinged liek a mutherfucker. Am I doing somethign wrong here?
If I look at the d15boost one, it has liek 30 deg advance at full boost, isnt that wayyy too much?

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

They are for reference. Not to not have to tune your car. Its to get you to the dyno with your motor in tact and not have to spend 4 hours of costly dyno time. Insted you spend an hour just fine tuning. Adjust the timing it need be. ::)

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I've used both of them with no pinging at all. ??? Check your base timing, maybe?

The D15boost maps have less timing than the ng48_rory. I'm assuming you meant D16A6 instead of D16A1?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Yeah sorry d16a6. Ill check my base timing,
but doesnt 24 deg advance at 4000rpm at 10 psi seem way too much?

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

It doesn't seem to far off to me, but I'm no expert.

I was getting scared so I added -.25 per psi retard to mine, but even before I did that I wasn't getting any detonation, although I do have very low compression.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

whats the info on that PR3 .bin file? Anybody tried it yet. What was the setup with this one? whoever posted that one, please let me know.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

What are the 5 letters in front of the PR3 in the filename?

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

haha yea, I realized that abt 5 minutes after I posted that question..... :-[

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

if you go into the uberdata forum I and in the roms sticky I have posted my .bin for my y8. I tuned an average afr of 11.5 at 8psi. I also did some tuning with the partial throttle maps. I have my dizzy set at 12 degrees and my base timing in the maps is at 12 degrees. I started with bbka's maps and tuned from there. Anything over 8psi and you will probably run kinda rich. I turned the boost up to 10psi now and my afr is dropping down into the low 11's at 10psi. I also posted my log of an 8psi pull if you want to check out the afr.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I'd really appreciate if you could post it. You know all the little details of your setup to post and plus its a record if you ever want to go back and change the tune to update it.

I'm sure it would help everyone out.

Thanks!

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Alright i uploaded the file to your site :)

Also take note that this was done with my distributor set at 12 degrees because its a y8. I'm still trying to figure out if this is the correct way to set it or not...it runs fine though so you shouldn't have any problems.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

THANKS!

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

added some FI b-series vtec maps, b16a jrsc, and b18c turbo

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Good to see you here Toda Party :D

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

ive been meaning to sign up but im so lazy i hate signing up on new forums...

but then i saw the homemadeturbo vid and i had to join

yea i got a homemade turbo nigga lolol

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

no problem man. If anyone tries it out let me know how it works. Remember to set your timing at the dizzy to 12 degrees.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I'm sure people will D/L it :) but they never tell me how they work.

If I ever get a chance to use it I will let you know.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

sounds good man.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

what ecu is you .bin for? i have a y8 and running uber and want to try your bin.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

i'm running it on a p28, but i'm sure it would work with a p30, p75, etc. Its just using p28 code.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

i am running a P06, is there a way to run that on mine?

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

yes you can use it. As long as your p06 is chipped for vtec then it will work just fine.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

anybody willing to burn a chip for me? i don't have a burner. i'll pay whatever it costs..