Re:BIN file depository (TE, Uberdata, Crome, etc)
 

you should just buy a burner man. Its worth it because you can just burn yourself a revised chip whenever you need to.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

i threw up a b18bturbo map i had as well.

Dseries? Please, B serious!!

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

i posted up a new version of my maps guys. The fuel tables from vac to boost transistion needed a little smoothing out in 2d so I fixed that.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I threw my d16z6 bin on there. Wideband tuned for WOT. Still has closed loop. DSM 450s and 16G turbo, with DSM sidemount.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Got my freshly tuned map up there, good for D15's with bigger turbos ;) Timing is backed down on that one due to the recommendation of my tuner, enjoy.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

just uploaded my bin, it runs a bit rich. n/a d16z6 240cc ps9 vtec at 4800rpm redline 7500rpm...

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Man you guys are going nuts here lately! Sweet!

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

I have three more coming, when I get home.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

i just tossed up my Crome map, first Crome map in! woo!

Setup was JDM D15B VTEC, 450CC DSM's, 15g GReddy turbo, 11psi was the highest I could get the gate to hold.

Run 3 on this dyno sheet went well, shows a pretty decent AFR, the others are all fucked up from intense blowby, what a smokeshow that was... they say their sniffer reads about 1/2 point off, so its actually a little richer than it needs to be in some spots.

http://centerlinemotorsports.com/jason/images/dyno3.jpg

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Very Nice FOOK...now just get some more of your Crome buddies to post up ;)

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

who told docboost that crome could only be used for dohc stuff? poo on them.

and i swear for whatever reason I am like the only person on earth that ever used Crome.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

As soon as I get my Teg running, I'll be using TE, Crome and UD on it :)

I figure I'm going to try and get a good solid 10psi tune down with each and then go run at the track and see (not that it should make any difference)

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

i will be adding a new .bin soon. I got around to hooking up my map signal to datalog and now my part throttle boost maps are looking much better. Before it was a little lean at part throttle boost.

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

hopefully with the logging we do this weekend, we can get uber to fix the gay 3bar vacuum crap out problem... and then i should hopefully have a bseries vtec 3bar basemap for all y'all ballas

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Looking good Chris. The list is getting bigger and better. I just DL'd the Z6-PS9 map and will be giving it a shot tomorrow. :D

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Yeah its starting to get bigger...mostly all you guys.

------ the word on H-T and the Uber forums!

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

If my car will ever stay running for more than a few days I'll have a nice one to upload. :-\
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

Haha...make sure you put that *disclaimer* in their when you post the BIN :)

Re:BIN file depository (TE, Uberdata, Crome, etc)
 

hahahahahaha Oeps I think I put up the wrong D15boost.bin...that one was for racing :P, but I drove with it daily afterwards so.
over here we get RON98 fuel and it's cold and we are below sea level...so running lot's of timing is not a problem....

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

i just uploaded a h22 tune I did on my friend's stock jdm h22 with intake, exhaust, and test pipe.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

I just scheduled a tuning session for an LS-Vtec JRSC this sunday so I'll throw that up if it happens.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

i need a good bin for b16 blox b's, omni valvetrain, stock compression, i/h/e, flywheel, msd ign/coil. any help is appreciated.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

This isnt a "find me a BIN" thread...its a post what you got thread.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

gotcha, sorry.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

No worries...just telling ya so you dont waste time lookin back.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

i added my f22b dohc bin. hope it helps someone out :-*

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

Just added a turbo ls .bin. T60 turbo, 440's, 11psi, etc.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

I gotta add my tuned Crome BIN I just made :)

Turbo LS, 450cc injectors, Motorola 2.5 BAR Map sensor...10psi

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

hey i was looking at these bins i just got all the stuff to go turbo on my d15b vtec motor andi was wondering whitch one of these can i use using po8 ecu? i just want it to not blow up when i put the turbo on and maybe drive it around for a littel bit untili get to the dyno? any help?

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

just added my Crome .bin from last weekend ;D.

---- i better change my sig now :o

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

i have a 8 to 1 b16 1200cc 3bar map if n e one need it
uberdata 25 miles p/g ;D

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

jeff you may want to take a look at your .bin again. You have lines and stuff crossing all over the place. :P

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

Also i just posted my new .bin for my z6head/y8block setup. Pulls a little harder in the top end then the old straight y8 setup did! Also posted a new tune of my friend's built ls now that he got an exhaut put on it.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

Just posted another LS .bin. T3/T4, tubular manifold, 750cc injectors, 2.5" exhaust, etc....damn i tune a lot of ls's.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

man ive got so many new ones i could toss up.

if only i could get my wireless working so I could get my laptop live...

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

Get a $25 jump drive. It has come in HANDY bigtime a few times while I have been tuning.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

just uploaded my current bin..277whp 248tq 13.8 psi..Church Dyno Tuned.. :)

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

just added one.

the details on the setup are all here
https://www.homemadeturbo.com/forum/...?topic=51345.0

quick cliffnote: basemap only, 450cc, z6, t3 42/48, tial wg, crome/p28, vtec 4500, redline 7400

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

just posted up my most recent one. part throttle is perfect and timing is like a stock y8, 7400 redline, 4375 vtec.

Re: BIN file depository (TE, Uberdata, Crome, etc)
 

Was wondering if someone could point me in the direction of a good start up map for my new motor, Using uberdata

Set
B18b1 block (fully built :wiesco pistons, eagle rods, ectect)
B18b1 head fully built
RC 550 injectors
Walbro 255 fuel pump
18g turbo.

I'm really just looking for something safe to start the car with, After that i'm having xenocron come down and tune it up proper.