i am running a d16z6
t25 turbo
arp head studs
fmic
450 dsm's
walboro 255
hf mani
letme know if you have anything. i can either chip my ecu myself and run a basemap or .bin form someone who has been tuned or run the hack and run similiar settings to someone who has been tuned also... please help

 

you dont really need the fuel pump

you can test out my 14b bin. Its not uberdata, its Crome, but it will work. Use at your own risk I still consider this thing very much un-tuned, and I can't give you any input on how it will act with your setup.

look for my post in the engine management section, its recent.

 

http://www.-------------/bins

Be careful using others maps...

 

oh yeah! almost forgot about the bin directory. *uploads*

 

thank you. so find a bin closest to my setup and go from there. just need something to start with then adjust the 1's and 2's

 

have a p28 ecu on a d16z6. running a t25 turbo. i want to run 10-11 psi stock block. i am gonna have the ecu set up for uberdata and would like to try it yself. i need it done asap really. a friend and i are going to attend a tuning glass in june but i want to learn what i can now. the class is $1000!!! a piece not including room and board and gas to get there. but i need a basmap if anyone has one. just a bin i can use to get started.


255 fuel pump
t25
hf mani
450 injectors
fmic
d16z6

also was wondering if i should install my head studs and use the cometic head gasket to run 9:1 compression ratio?
i als o have a wideband available and my friend has all software. we are both new at this and dont have any basemaps



this was my other thread if you have any input on this also

 

Which class are you going to for $1000 each?