lilpooh21186

Im trying to focus on my part throttle cruzing maps and they are almost dead on where i want them to be. What i am having a problem with is when it reads between the lines it gets about 2 afr richer like say at 21hg to 17hg i want my afr to be 15.1 so i get 15.1 at 21hg and mabey like 14.8 at 17hg. but inbetween those columes ill be runing 13.8-14.2. So basicly my ? is is there some way to limit or proportion the % of what colum the ecu is gunna read to lean them out. my setup is b16a2 9.0 cpr bored .20 with pte 880 and a wired in resistor box runing crome gold.

lilpooh21186

Thanks for the reply but if i do that wont it throw off the entire map.

Adam Hopkins

It might actually be something with your tip-in. Try adjusting there.

lilpooh21186

i never thought of that ill have to try that tonight

turbo4life

create a map with more columns in vacuum

first add more columns do like 24 and then go adjust tables and make even distribution adjustment on the pop out menu when you click on tables

lilpooh21186

i thought of that never tried it though thanks for the reply fucked my tranny last night so my car is retired