marcj

I had the day off, so I decided to find a place to put my wideband display..
had plans of putting it behind the tach but I decided to not cut it up incase I ever wanted to put it back to a stock cluster..

I shift by ear, and setup a CEL shift light for high rpm shifts.. so no need for the stock tach

ShoofIsLudin

looks **** man. I ------ love it!!

Why not get a digital tach from summit or something to mount right above the w/b. These are just a few suggestions for ya....

http://store.summitracing.com/egnsea...=KeywordSearch

http://store.summitracing.com/egnsea...=KeywordSearch

http://store.summitracing.com/egnsea...=KeywordSearch

Ef8sirjunkie

thats a realy clean install.

txdohczc

this might work well too http://cgi.ebay.com/DIGITAL-RED-LED-PANEL-FREQUENCY-SPEED-METER-TACHOMETER_W0QQitemZ260312145283QQcmdZViewItemQQpt ZLH_DefaultDomain_0?hash=item260312145283&_trksid= p3286.c0.m14&_trkparms=66:2|65:15|39:1|240:1318

igotnothin

+1

I might need to look in to doing that, beats teh hell out of setting it in the ash tray

marcj

another pic, showing a little more detail after it was done.. it's all hooked up now, i'll get a night time pic in the car later
Picture016.jpg?t=1226512530

lock-pop!

looks ------ ****

ive done that once with a integra cluster...

i did a 3.5 lcd screen though

marcj

thanks guys.. yeah i'm happy with it.

thinking about doing a little write up on it once I get the controller mounted in my glove box

Walter

is that JAW?

ShoofIsLudin

its bootyful

The tach is only a suggestion, u did say u shift by ear..... and have the CEL shiftlight....so u should be fine....