HomemadeTurbo - DIY Turbo Forum

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

added a 3 bar map sensor now idle is very rough

Thread Tools
 
Search this Thread
 
Old 03-29-2006, 06:51 PM
  #1  
0.0 BAR
Thread Starter
 
bigboost123's Avatar
 
Join Date: Jan 2006
Posts: 33
Default added a 3 bar map sensor now idle is very rough
dont know if i did something wrong i check my connections and its fine! made the map for three map! put it on the dyno got the air fuel at 12.1 all the way clean but idle sucks!
bigboost123 is offline  
Reply
Old 03-29-2006, 07:01 PM
  #2  
3.0 BAR
 
FooK's Avatar
 
Join Date: Apr 2004
Posts: 9,800
Default Re: added a 3 bar map sensor now idle is very rough
so tune the idle.
FooK is offline  
Reply
Old 03-29-2006, 07:08 PM
  #3  
0.0 BAR
 
SpankedYA!'s Avatar
 
Join Date: Mar 2004
Posts: 0
Default Re: added a 3 bar map sensor now idle is very rough
:1
SpankedYA! is offline  
Reply
Old 03-29-2006, 07:36 PM
  #4  
0.0 BAR
Thread Starter
 
bigboost123's Avatar
 
Join Date: Jan 2006
Posts: 33
Default Re: added a 3 bar map sensor now idle is very rough
it site 12.5 at idle where should i be? should i add timing? not sure which way to go here
bigboost123 is offline  
Reply
Old 03-29-2006, 07:54 PM
  #5  
0.0 BAR
 
SpankedYA!'s Avatar
 
Join Date: Mar 2004
Posts: 0
Default Re: added a 3 bar map sensor now idle is very rough
14.7
SpankedYA! is offline  
Reply
Old 03-29-2006, 08:26 PM
  #6  
0.0 BAR
Thread Starter
 
bigboost123's Avatar
 
Join Date: Jan 2006
Posts: 33
Default Re: added a 3 bar map sensor now idle is very rough
thanks
bigboost123 is offline  
Reply
Old 03-30-2006, 12:44 AM
  #7  
3.0 BAR
 
FooK's Avatar
 
Join Date: Apr 2004
Posts: 9,800
Default Re: added a 3 bar map sensor now idle is very rough
base timing at idle, and 14.7-15:1 straight AFR's
FooK is offline  
Reply
Old 03-30-2006, 01:17 AM
  #8  
3.0 BAR
 
Ravage70's Avatar
 
Join Date: Jan 2004
Posts: 5,933
Default Re: added a 3 bar map sensor now idle is very rough
i would do 14.7 in vac and 12-11 depending on boost levels
Ravage70 is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Motorola (Freescale) 2.5 BAR and 4 BAR map sensor mods (56k....thumbnails)
0b00st0
Engine Management
85
07-17-2007 06:33 AM
2.5 Bar MAP sensor on Stock MAP
myshtern
Engine Management
12
10-28-2005 01:36 PM
Urgent!: Code 14 IACV after turbo install. rough idle
Slammd Sol
Forced Induction
4
03-14-2005 07:09 PM
Is rough idle typical with turboedit?
green91
Engine Management
13
07-24-2004 04:51 PM
Back to Subforum
Engine Management
View Next Unread
EACV ecu pinout...




Advanced Search
Quick Reply: added a 3 bar map sensor now idle is very rough


Reply Closed Thread Share

All times are GMT -5. The time now is 09:02 PM.