added a 3 bar map sensor now idle is very rough
dont know if i did something wrong i check my connections and its fine! made the map for three map! put it on the dyno got the air fuel at 12.1 all the way clean but idle sucks!
|
Re: added a 3 bar map sensor now idle is very rough
so tune the idle.
|
Re: added a 3 bar map sensor now idle is very rough
:1
|
Re: added a 3 bar map sensor now idle is very rough
it site 12.5 at idle where should i be? should i add timing? not sure which way to go here
|
Re: added a 3 bar map sensor now idle is very rough
14.7 ;)
|
Re: added a 3 bar map sensor now idle is very rough
thanks
|
Re: added a 3 bar map sensor now idle is very rough
base timing at idle, and 14.7-15:1 straight AFR's
|
Re: added a 3 bar map sensor now idle is very rough
i would do 14.7 in vac and 12-11 depending on boost levels
|
All times are GMT -5. The time now is 07:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands