WTB: Dohc Zc longblock, T3 turbo, Log mani
#1
WTB: Dohc Zc longblock, T3 turbo, Log mani
I'm in dire need of a Dohc Zc longblock. I'm in WV, and i'm willing to come pick it up in VA, MD, PA, DC, and surrounding area's. Looking for one that has low miles and that runs decent but let me know what you guys have!!!
I also need a T3 turbo with .42/.48 or close specs, with minimal or no shaft play, and a log style mani to fit the T3 on a Zc. I will pick up if in any of the area's above!!! Cash in hand but need the Zc before anything really!
Let me know whats out there
I also need a T3 turbo with .42/.48 or close specs, with minimal or no shaft play, and a log style mani to fit the T3 on a Zc. I will pick up if in any of the area's above!!! Cash in hand but need the Zc before anything really!
Let me know whats out there
#4
Re: WTB: Dohc Zc longblock, T3 turbo, Log mani
Well its not a ZC but I have a D16a6 that i am gonna pull out of my 91 crx si and have a revhard cast T3 mani and rebuilding a .42/.48 turbo <--which both were on the motor, i am putting a LS in and a bigger turboso i have no use for this but I am sure we could work a good deal if you come get all of it, I'm in PA 19512, let me know, thanks...Matt
#5
Re: WTB: Dohc Zc longblock, T3 turbo, Log mani
Is the a6 stock how much boost were you running? any problems with the motor at all? do you have pics? If you don't have an ls motor yet i'm probably picking one up tomorrow if you wanna make some kind of deal with that, maybe?? Its a 90 b18a1 with about 110k on it runs fine. also did you say that the turbo needs a rebuild or you rebuilt it? very interested!!! anyways let me know
edit: also is the motor still in the car? if it is maybe i can come take a look at how she runs and maybe help pull it and work something out that way
your only 3 hrs away from me, that aint too bad for a road trip!!!
edit: also is the motor still in the car? if it is maybe i can come take a look at how she runs and maybe help pull it and work something out that way
your only 3 hrs away from me, that aint too bad for a road trip!!!
#6
Re: WTB: Dohc Zc longblock, T3 turbo, Log mani
Stock a6 160,000 miles i believe replaced the headgasket and timing belt about a year ago but i think i only put 5,000 miles since then, boosted 6psi and then i decided to go with an LS and I already have 2 hear so I don't need another...The turbo is ripped apart and I was rebuilding it but the sent me the wrong bearings so I need to order the proper ones, it was a .42/.48 but I was making it a .60/.48 since i had the housing and new compressor wheel here, I cleaned it up really good and just needs the bearings in and balanced and it will be ready...the mani is ok, was cracked before I bough it and brazed never leaked there but it leaked around the external gate but just needs to be taken to a machine shop to have it leveled, i never did because i was going b series, yes the motor is still in the car so if you wanted to come drive it you could, i don't believe there are any problems with it ran great before i boosted and the turbo blew before i could even turn up the boost, haven't driven it much since then...Oh i always ran 91 octane after the rebuild and with the turbo it was a base map so it ran really rich so everything should be in good conditon, I am waiting for a new rad in the mail, i gave mine to the gf il sis when she blew hers up cause its my project car not my daily..email me and i will try and snap some pics for you just tell me if there is anything specific you want to look at, thanks...Matt Loserkidwac@gmail.com
#7
Re: WTB: Dohc Zc longblock, T3 turbo, Log mani
LoserKid: How much did you want for everything all together I really didn't want an a6 and i kinda wanted something with a lil lower miles but let me know how much you want for everything. also does it come with a tranny, if so what kind
bump, let me know what everyone else has too
bump, let me know what everyone else has too
#8
Re: WTB: Dohc Zc longblock, T3 turbo, Log mani
I don't really know what it would all be worth, maybe an a6 is worth $300, si tranny like $150...then mani is worth atleast $100, and then the trubo in its current needing assembled and bearings maybe $50 or so...there are some factors that could lower the price too, like if you come pull the motor and if i finish rebuilding the turbo and have the mani shaved but I'd say $500 for everything seems fair but i am open to offers and negotiation if you want to work a deal...The motor runs really strong and has plenty of life in it, let me know and we can work something out, thanks...Matt
#9
Re: WTB: Dohc Zc longblock, T3 turbo, Log mani
i have a d16a1 dohc. its a brown top off the 87-88 i think. about 115k miles. i never ran it but it turns over fine. pretty complete longblock (dist, clutch/pp, intake mani with tb all complete, etc). i live 1 hour north of nyc. if you come get it, ill say 100 dollars
Thread
Thread Starter
Forum
Replies
Last Post
ProOnThaSnow
Wanted
1
01-17-2006 01:19 PM