WTB: Any working internal wastegate
07-18-2007, 01:48 PM
#1
0.0 BAR
Thread Starter
Join Date: Sep 2005
Posts: 22
WTB: Any working internal wastegate
I was having an internal wastegate fabbed onto my turbo and we tore the diaphram when pressure testing it. Now I need a replacement.
The turbo is a rectangular port Garret T25 but I'll take any wastegate with a straight actuator arm. Or Straightish. So long as it comes off the wastegate housing straight and there's enough length to cut and weld. I'd prefer a straight arm with threads on the end if possible. Type of mounting bracket doesn't apply as I'll just cut and tack weld it to my existing bracket.
The turbo is a rectangular port Garret T25 but I'll take any wastegate with a straight actuator arm. Or Straightish. So long as it comes off the wastegate housing straight and there's enough length to cut and weld. I'd prefer a straight arm with threads on the end if possible. Type of mounting bracket doesn't apply as I'll just cut and tack weld it to my existing bracket.
07-18-2007, 07:49 PM
#5
0.0 BAR
Thread Starter
Join Date: Sep 2005
Posts: 22
Re: WTB: Any working internal wastegate
PM'd again and here are the pics.
Top-down view.
What we were trying to do before ruining the wastegate. I rigged the arm and my mechanic was going to tack weld the wastegate to the mount that was on there.
Another pic of the current wastegate.
Exhaust Housing
Turbine Housing
Might as well spam the new rims, too...
Top-down view.
What we were trying to do before ruining the wastegate. I rigged the arm and my mechanic was going to tack weld the wastegate to the mount that was on there.
Another pic of the current wastegate.
Exhaust Housing
Turbine Housing
Might as well spam the new rims, too...
Thread
Thread Starter
Forum
Replies
Last Post
jdmturbo112
Fabrication
2
05-31-2007 04:13 AM
djay86
Forced Induction
10
11-26-2005 03:56 PM
