Try this again......LS/vtec for sale....
11-22-2006, 03:34 PM
#1
Guest
Posts: n/a
Try this again......LS/vtec for sale....
0 MILES ON MOTOR SINCE REBUILD!!!!
Details and prices
Gsr head $400
b16 cams $100
adjustable cam gears $150
resurfaced
cleaned
3-angle valve grind
tapped and plugged for ls/vtec conversion.
TOTAL COST OF MACHINE WORK ON HEAD-$450
dizzy out of a 95 gsr. (no plugs or wires) $75
HEAD TOTAL $1175
B18A1 block $150
type-r pistons $300
arp rod studs $100
honed
decked
crankshaft has been rebalanced and micropolished
TOTAL COST OF MACHINE WORK DONE ON BLOCK $400
new rings and bearings $150
Comes with braided stainless steal oil line and all fittings. $50
BLOCK TOTAL $1150
-------------------MOTOR TOTAL AFTER ALL PARTS AND WORK-----------------$2325
All that's needed is some head studs, plugs and wires.
Price is $1500 o.b.o. I need to get rid of this motor asap since i'm moving in just over a week. Reasonable offers will be considered but realize that this price is ALMOST $1000 OFF WHAT I PUT INTO THE MOTOR!!!!
TRADE OPTIONS:
1. B16 OR GSR BLOCK. PREFER JDM BUT WILL ALSO TAKE USDM. EXPECT TO ADD $$$ ONTOP IF NO AFTERMARKET DONE TO THE MOTOR. (WILL TAKE A COMPLETE B16 OR GSR WITH TRANSMISSION FOR LITTLE TO NO $$ ONTOP DEPENDING ON CONDITION) MILES MUST BE AT OR UNDER 80K.
2. PARTS FOR A B-SERIES TURBO SETUP IN A DEL SOL. EXPECT TO TRADE A COMPLETE TURBO SETUP FOR THIS MOTOR. INCLUDING; T3/T4 TURBO, MANIFOLD, INJECTORS, FUEL/ENGINE MANAGEMENT, PIPING, FRONT MOUNT INTERCOOLER, BOV, EVERYTHING READY TO BOLT IN.
YOU WILL NOT FIND A LS/VTEC WITH 0 MILES AND IN THIS CONDITION EVER FOR THE PRICE OF ONLY $1500. THIS IS A STEAL! ACT NOW BEFORE IT'S GONE!
SHIPPING IS POSSIBLE.
NO I WILL NOT BOX THIS MOTOR UP AND SHIP IT.
NO I WILL NOT SHIP SOUTH OF SAN FRAN OR NORTH OF CALI/OREGON BORDER.
Details and prices
Gsr head $400
b16 cams $100
adjustable cam gears $150
resurfaced
cleaned
3-angle valve grind
tapped and plugged for ls/vtec conversion.
TOTAL COST OF MACHINE WORK ON HEAD-$450
dizzy out of a 95 gsr. (no plugs or wires) $75
HEAD TOTAL $1175
B18A1 block $150
type-r pistons $300
arp rod studs $100
honed
decked
crankshaft has been rebalanced and micropolished
TOTAL COST OF MACHINE WORK DONE ON BLOCK $400
new rings and bearings $150
Comes with braided stainless steal oil line and all fittings. $50
BLOCK TOTAL $1150
-------------------MOTOR TOTAL AFTER ALL PARTS AND WORK-----------------$2325
All that's needed is some head studs, plugs and wires.
Price is $1500 o.b.o. I need to get rid of this motor asap since i'm moving in just over a week. Reasonable offers will be considered but realize that this price is ALMOST $1000 OFF WHAT I PUT INTO THE MOTOR!!!!
TRADE OPTIONS:
1. B16 OR GSR BLOCK. PREFER JDM BUT WILL ALSO TAKE USDM. EXPECT TO ADD $$$ ONTOP IF NO AFTERMARKET DONE TO THE MOTOR. (WILL TAKE A COMPLETE B16 OR GSR WITH TRANSMISSION FOR LITTLE TO NO $$ ONTOP DEPENDING ON CONDITION) MILES MUST BE AT OR UNDER 80K.
2. PARTS FOR A B-SERIES TURBO SETUP IN A DEL SOL. EXPECT TO TRADE A COMPLETE TURBO SETUP FOR THIS MOTOR. INCLUDING; T3/T4 TURBO, MANIFOLD, INJECTORS, FUEL/ENGINE MANAGEMENT, PIPING, FRONT MOUNT INTERCOOLER, BOV, EVERYTHING READY TO BOLT IN.
YOU WILL NOT FIND A LS/VTEC WITH 0 MILES AND IN THIS CONDITION EVER FOR THE PRICE OF ONLY $1500. THIS IS A STEAL! ACT NOW BEFORE IT'S GONE!
SHIPPING IS POSSIBLE.
NO I WILL NOT BOX THIS MOTOR UP AND SHIP IT.
NO I WILL NOT SHIP SOUTH OF SAN FRAN OR NORTH OF CALI/OREGON BORDER.
Thread
Thread Starter
Forum
Replies
Last Post
GimpyCivic
General Discussion
14
03-30-2004 01:04 AM
