My part out thread, it's about damn time, MN dial up take a nap
 

Sorry guys, I have been busy selling my house. I close on the 18th ;D Now I am looking at new houses. But I took sometime to get some pictures of all my stuff. Steathmode picked up the short block so here is the rest of my treasures.
I'm located in Buffalo, MN and I ship UPS everyday. I have paypal, or can take a credit card or cash works just fine too. Only trades that will be guns, gold or land.


T3/T4 .63 ar, .70 46 trim, little shaft play. 300 for the turbo and 150 for the manifold, or 400 for both. Buyer pays all shipping cost
Attachment 18755
Attachment 18756
Attachment 18757
Attachment 18758
Attachment 18759
Attachment 18760
Attachment 18761

B18a head rebuilt, and in very good shape, Decked, vavle job, nothing fancy. I just don't like throwing things away.
100 bucks plus shipping.
Attachment 18762
Attachment 18763
Attachment 18764
Attachment 18765
Attachment 18766

ARP head studs for a b18a, I don't know about other fitments. Only torqued once. 70 dollars shipped to the lower 48 states.
Attachment 18767

ACT clutch and flywheel package for a 92-93 b18. 4 puck no spring, the lighter of the two flywheels. No street use. Actually we are very easy on clutches, because there is no traction at the track. Works great, and never had any problems.
350 bucks for the both. Missing one bolt :6 I also sent it out to get the balance checked both installing it.
Attachment 18768
Attachment 18769
Attachment 18770
Attachment 18771
Attachment 18772
Attachment 18773
Attachment 18774


Homemade fuel rail, 460cc RX7 flowed and cleaned injectors. 50 bucks for the fuel rail and 60 for the injectors or 100 shipped for both. I will throw in the intake for free, but you have to pay the shipping.
Attachment 18775
Attachment 18776
Attachment 18777

Oil cooler adapter for I think any B engine. It has -10 lines comeing out from it. 40 bucks shipped to the lower 48.
Attachment 18778
Attachment 18779

OBD1 Dissy wickedpumpkin did a couple mods for wiring. Comes with newer OEM plug wires. 75 dollars shipped in the lower 48 states.
Attachment 18780

Re: My part out thread, it's about damn time, MN dial up take a nap
 

pmed you

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I can vouch for Randy. Him and his dad own a badass corvette shop with a full machine shop inside. I can't think of anyone I'd rather buy used parts from.

Still eyeballin that flywheel. ^-^

Re: My part out thread, it's about damn time, MN dial up take a nap
 

---- me running! Damn you have some good deals going. I assume that the turbo manifold is for B series.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

Thanks dude!!!

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I'll take those arps, send me paypal info and you'll have payment

Re: My part out thread, it's about damn time, MN dial up take a nap
 

payment sent for the arp headtuds

Re: My part out thread, it's about damn time, MN dial up take a nap
 

dhn had you beat by a day. So if he pays the parts will go to him.

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

---- >:(

Re: My part out thread, it's about damn time, MN dial up take a nap
 

You should be getting a email from UPS today!!!

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

FUCKEN HOODWINKED!!

I'd send somebody dog ---- for that one.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

WE were talking back and forth on the PM system. He wanted them yesturday. We just ironed out some details.

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

yeah and i've 'hoodwinked' more than a few people on this site. I can take what i've dished.

i pm'd higher offers to people that already accepted a lower amount more than a couple times before. ---- some dude had to give a refund cause he already accepted paypal, now that's dick.

this guy just seemed like he wouldn't ---- someone over like that though, so only puppy ---- for you :4

Re: My part out thread, it's about damn time, MN dial up take a nap
 

what do you want from me.

dhn
0.5 BAR

Posts: 102



(No subject)
« Sent to: iceracercrx on: March 30, 2008, 11:43:31 AM »
« You have forwarded or responded to this message. »

--------------------------------------------------------------------------------

how much for the arp headstuds...injectors and fuel rail shipped

i have cash in hand and ready to buy



jdmdelsol
0.0 BAR

Posts: 0



(No subject)
« Sent to: iceracercrx on: March 30, 2008, 09:21:52 PM »
« You have forwarded or responded to this message. »

--------------------------------------------------------------------------------

hey i sent u an email also, just reply to either, but do u still have those injectors for sale? thanks



dhn
0.5 BAR

Posts: 102



Re: fuel rail, injectors, and arp
« Sent to: iceracercrx on: Today at 10:14:24 AM »

--------------------------------------------------------------------------------

hey bro..i jus got a deal on some other injectors thanks tho..im sending 70 bucks for the arp headstuds tho!



jdmdelsol
0.0 BAR

Posts: 0



Re: (No subject)
« Sent to: iceracercrx on: Today at 10:47:51 AM »

--------------------------------------------------------------------------------

so whats done to the rail? also are you selling the manifold? and do the injector have a resistor box?



jdmdelsol
0.0 BAR

Posts: 0



Re: (No subject)
« Sent to: iceracercrx on: Today at 03:52:22 PM »
« You have forwarded or responded to this message. »

--------------------------------------------------------------------------------

hey, so what is done to the fuel rail, is it for a d series? also do the injector has a resistor box, and whats the deal with the intake mani? thanks



jdmdelsol
0.0 BAR

Posts: 0



Re: (No subject)
« Sent to: iceracercrx on: Today at 04:47:48 PM »

--------------------------------------------------------------------------------

ok cool, im gonna just get the injectors then. so you say they have been flow tested? oh yeah, do they come with clips, also how hard is it to install them, what modifications?



jdmdelsol
0.0 BAR

Posts: 0



Re: (No subject)
« Sent to: iceracercrx on: Today at 05:06:22 PM »

--------------------------------------------------------------------------------

hey, i was gonna get the injectors, but i found some dsm 450s sorry for the trouble

Re: My part out thread, it's about damn time, MN dial up take a nap
 

Randy, you're ruining the fun. Can't we just pretend that someone got hoodwinked? :D

How much is the flywheel if nobody wants it?

Re: My part out thread, it's about damn time, MN dial up take a nap
 

yeah you didn't dick anyone over. I was saying it woulda been dick if you sold it to me after promising it to him. i was tempted to offer a couple extra bucks to persuade you, but i wsa at work.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I think I'm going to take those injectors. What engine is that manifold off of? I might take that too.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

B series

Re: My part out thread, it's about damn time, MN dial up take a nap
 

It was a B18A 92.

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I might take the clutch if stealthy takes the the flywheel, let me know what you'd be looking for shipped to PA 19512

Re: My part out thread, it's about damn time, MN dial up take a nap
 

interested in the head, manifold and arp head studs, shipped to 98226 WA state... so the head is stock just rebuilt? lmk a price all together shipped thanks

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I will ship all that for 15 bucks, if you buy the head and manifold. The ARP studs are sold already. It is stock just rebuilt.

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

how much for the manifold and turbo to 27283?

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I will ship it for the 400 dollars at this point, to help sweeten the deal.

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

what kind of manifold is it and about how far is it from the head flange to the farthest point out on the turbo? im trying to decide if itll fit my crx.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

Attachment 18618

Here is the manifold on my 84 CRX. I built the manifold using BMC flanges and ACE stainless weld els. I even spent the cash to have the flanges ground flat after welding them.. I don't have a block and head together anymore, so it would be hard to measure.

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

i remember that now didnt u have a full rad to? if itll fit an 84 i know itll fit my 91 crx with an ls. heck yea i want it send me a paypal addy and ill get you the money on the way as soon as possible

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I had a full size radiator. The stock one fit just fine. When I put in the Ron Davis 2 inch radiator, I had to build a bracket to push the bottom of the radiator foward about a inch.

You sir have a PM
Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

Note on the dissy.. The wiring mods were done so we could use an MSD 6AL box with it. There is a GM weatherpac plug on the outside of the dissy, you either plug it in to the MSD box or plug in a connector with a jumper on it to run it without the MSD.

Just in case some one was wondering what kind of wiring mods.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

interested in the dissy. PM sent

Re: My part out thread, it's about damn time, MN dial up take a nap
 

payment sent on dissy.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

dissy sold
turbo and manifold sold and shipped

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

those injectors fit d-series fuel rail? IF so lets meet up- i live in MN

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I've got $250 cash monayz on the turbo! I've been looking for a 4" inlet .70 a.r housing turbo (TO4S?) for awhile! Can't believe I missed it. So some shaft play? Just side to side or is there end play? I'm ------- interested! I don't want the manifold as I don't have any use for it. PM me if you wanna sell the turbo separate. Thanks dod.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

I handled the turbo when I met up with Randy. It's got no more shaft play than any good used turbo is supposed to.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

Ok cool. Sell it to me for $250. Thank-you.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

Fuuuuuuuuuuuuuck!

Re: My part out thread, it's about damn time, MN dial up take a nap
 

The turbo and manifold shipped yesturday to Hellbert. Sorry

Randy

Re: My part out thread, it's about damn time, MN dial up take a nap
 

---- you Randy! I wanted that turbo. DIAF you goddamn assclown.
:'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(


Oh well, I guess the 35R was meant to be. I just bought $1200 worth of welding supplies today, so add a 35r and there goes $2500. I don't need to eat anyway.

Re: My part out thread, it's about damn time, MN dial up take a nap
 

ill sell it back to you for 500!!! hahaha j/k the turbos actually going on my h22 and my 63 60s going back on the ls