B16CRXT

I am selling my Cable USDM S1 transmission. It grinds into 3rd and could definitely benefit from a rebuild. $200 OBO. Pickup only. I cannot afford to ship it or meet you (more than 30 miles out) Picture coming soon. It is still at my friend Antony’s house.

Selling my battery terminal relocation kit and my odyssey battery bracket/mount/box.

relocating terminals
http://store.summitracing.com/...G1430
$10


Mount
http://store.summitracing.com/...w=sku
$35


An almost new set of Avid traction bars for the 88-91 EF. Installed on my crx for about 60 miles and removed. Pics available upon request. $225 OBO.


B18B1. Head has been removed, but is included with this. You get the whole long block minus dist., TB, alt, and starter. Unknown mileage. I ran it in my car for over a year. It burns and leaks oil. Never blew a head gasket or overheated though. Cylinder walls have no scarring. I'm sure the valve stem seals are the main problem with oil burning. I'll even throw in an extra LS Head that has been freshly resurfaced and cleaned. If you need a distributor, I have an extra OBD-0 one you can have. you would need new internals for it though. Pickup ONLY$275 obo
The block. You will receive it as shown with a brand new timing belt(never used):




The head that belongs to that block. I can throw in a mint OEM valve cover for another $40 on top of the price of the motor. Otherwise no VC.

The free(with purchase of long block, if you want it): freshly cleaned and resurfaced head. (bare)


I have another complete Ls cylinder head with no valve cover , dist. or TB also. $50.

OBD0 B16 Distributors. Used Distributor King dist. Core. In great working condition just has no components in it besides to rotor $100 The one on the left is the old, JDM one. Has an igniter in it and rotor, but that’s all. $80.


FMIC core size 15x5x2.5" with cast end tanks. Not the prettiest, but it is very efficient for low-mid boost applications. It always stayed icey on the cold side when I boosted 13 psi with a .48/.60 on my old b16. $50 OBO.


1 set of four Ls pistons and rods pulled from a B18B1. $40.



One good PR3 rod with a piston attached. Piston has cracks in ringland so it is no good, but the rod is in great shape. Make an offer.


OEM B16 head bolts. taken from my 1st gen B16A. Make an offer.


OEM CRX Si exhaust minus the cat. Muffler has a hole in it. Has a nice dual tip welded on. Come get it and its yours. If you want the cat, $50 for the whole thing.

USED BBK 62mm Throttle Body for sale. Still on my car. Works great, sticks a little. No sensors. $200 OBO.

Selling my Sigma 70-300 f/4-5.6 DG APO Macro Telephoto Zoom Lens for Canon SLR Cameras. It is in great shape. Comes with the Lens hood, and both lens caps, in original box. $160 takes it.







One brand new computer case. Never been used. Make an offer



Two: 235/75/R15 BFGoodrich All-terrain T/A KO tires. Used for about 10K miles. 90% tread left. Both in great shape besides some curbage of the white lettering. One of them is mounted on a 15”- 5 spoke wheel from my old Jeep Cherokee. 180




One Dual Bandpass subwoofer box with two MTX thunder 6000’s mounted inside. One of them works, the other causes the amp fuse to blow, so I disconnected it. Get that with my Volfenhag 700W bridgeable amp for $120 OBO



OBD0 B18A/B intake manifold $20


OBD1 B18A/B intake manifold $35


B series fuel rail make an offer


B series OEM FPR make an offer


B series rear main seal housing make an offer


Anodized blue vaccum manifold WITH fittings and one block off. $30


B16 crank pulley with V band groove$40


Also selling my weight bench. It also has a leg curl and preacher curl attachment not photographed, but included. All the weights are interchangeable. I beleive the bar is 2lbs making the weight on the bar (pictured)120lbs. Total of weights I have is right around 180. There is still a 10 lb weight on the leg curl that I removed. There is 25lbs on each butterfly curl bar. It also can be changed into an incline bench with two different incline settings. It can go decline too...though, I was never a fan of decline.
$40




I'm sure I have more to sell, but I'm not sure what it may be at this moment, so I may add more later on as I find stuff I need gone and might make a buck off of.

PLEASE bump my thread if you look! thanks guys!

bitchasscracker

dude that ls motors rusted pretty bad. look at those walls


i'lll give you $50 shipped on the block

B16CRXT

thats light surface rust. I can clean that up easily with high grit paper. $50 is a joke. you can come get it for $100.

sunboost

ls pistons/rods in good condition? 35 shipped to 90011?

crx2211

Bwahahahalolol! So what you're saying is he'd have to pay you to take the block? Shipping is more than $50 itself. I like your style .

B16CRXT

Absolutely nothing wrong with them. Make it $40 and they are yours.

bitchasscracker

thats how i role

B16CRXT

roll? role? rhole? r-ole? :P

TiCaL

40 shipped on the intercooler i'll take it... paypal?

B16CRXT

Where to?