GSR H-beam rods w/ ARP2000's
#1
GSR H-beam rods w/ ARP2000's
First off I haven't posted here in a long *** time but I figured I would try it out. I can't remember if I have any vouches or not but I am from Mn and I could ship this stuff lets just say for $15 flat.
Like the title says: I have some "knock-off" ebay brand H-beams that I picked up for my GSR motor but I ended up buying some pistons that were not for a floating wrist pin so I could not use these. I also bought ARP 2000 rod bolts to compliment the rods. I would say they are exactly like eagle or tuner toy rods but they are stamped with "magnitude" People have been using these rods with turbo/nitrous/all motor app's with great sucess lately but I just have no use for the now. My loss your gain.
Comparison pic: (note, not on the correct type of piston. Any aftermarket piston for use with floating wrist pins will work.... JE, Arias, Cp, ect.....)
Priced to sell @ $225 +ship
Here's the specs:
-Length: 5.430” / B.E.: 1.89” / S.E.: .827” / Weight: 478Grams
-4 Rods, 1 complete set, 4340 Forged Aircraft Steel H-Beam Rods
-High Tensile 4340 Chromoly Forged Aircraft Quality Steel -Two Piece Forging for Additional Strength
-Each Rod is Shot Peened, Heat Treated, Magnafluxed, Ultra Sonic Tested, X-Rayed
-Precisely Sized and Balanced - / + Grams
-Can Produce Up to 900+HP & 9000 RPM
-Applications: Integra, GSR Type-R
-Floating Bronzed Bushed Pins
-Same Factory as Eagles, Scats, CAT, Probe, Tomei, RPM, Procomp etc.
Like the title says: I have some "knock-off" ebay brand H-beams that I picked up for my GSR motor but I ended up buying some pistons that were not for a floating wrist pin so I could not use these. I also bought ARP 2000 rod bolts to compliment the rods. I would say they are exactly like eagle or tuner toy rods but they are stamped with "magnitude" People have been using these rods with turbo/nitrous/all motor app's with great sucess lately but I just have no use for the now. My loss your gain.
Comparison pic: (note, not on the correct type of piston. Any aftermarket piston for use with floating wrist pins will work.... JE, Arias, Cp, ect.....)
Priced to sell @ $225 +ship
Here's the specs:
-Length: 5.430” / B.E.: 1.89” / S.E.: .827” / Weight: 478Grams
-4 Rods, 1 complete set, 4340 Forged Aircraft Steel H-Beam Rods
-High Tensile 4340 Chromoly Forged Aircraft Quality Steel -Two Piece Forging for Additional Strength
-Each Rod is Shot Peened, Heat Treated, Magnafluxed, Ultra Sonic Tested, X-Rayed
-Precisely Sized and Balanced - / + Grams
-Can Produce Up to 900+HP & 9000 RPM
-Applications: Integra, GSR Type-R
-Floating Bronzed Bushed Pins
-Same Factory as Eagles, Scats, CAT, Probe, Tomei, RPM, Procomp etc.
#3
#5
#6
Robbie
Last edited by quick gixxer; 06-02-2009 at 06:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
accordepicenter
Wanted
0
05-06-2007 02:20 PM
TunerToys
Turbo Parts For Sale
11
12-01-2005 12:29 AM