GSR H-beam rods w/ ARP2000's
 

First off I haven't posted here in a long ass time but I figured I would try it out. I can't remember if I have any vouches or not but I am from Mn and I could ship this stuff lets just say for $15 flat.

Like the title says: I have some "knock-off" ebay brand H-beams that I picked up for my GSR motor but I ended up buying some pistons that were not for a floating wrist pin so I could not use these. I also bought ARP 2000 rod bolts to compliment the rods. I would say they are exactly like eagle or tuner toy rods but they are stamped with "magnitude" People have been using these rods with turbo/nitrous/all motor app's with great sucess lately but I just have no use for the now. My loss your gain.

Attachment 7929

Comparison pic: (note, not on the correct type of piston. Any aftermarket piston for use with floating wrist pins will work.... JE, Arias, Cp, ect.....)
Attachment 7930

Attachment 7931

Attachment 7932

Priced to sell @ $225 +ship

Here's the specs:

-Length: 5.430” / B.E.: 1.89” / S.E.: .827” / Weight: 478Grams
-4 Rods, 1 complete set, 4340 Forged Aircraft Steel H-Beam Rods
-High Tensile 4340 Chromoly Forged Aircraft Quality Steel -Two Piece Forging for Additional Strength
-Each Rod is Shot Peened, Heat Treated, Magnafluxed, Ultra Sonic Tested, X-Rayed
-Precisely Sized and Balanced - / + Grams
-Can Produce Up to 900+HP & 9000 RPM
-Applications: Integra, GSR Type-R
-Floating Bronzed Bushed Pins
-Same Factory as Eagles, Scats, CAT, Probe, Tomei, RPM, Procomp etc.

not to be a dick or anything but wasn't a 1.89 the ls rod width and the 1.77 the gsr bottom end? could be wrong it's been a while since I check widths

Well ----..... Checking on it..... I will figure it out by tomorrow. you might be right, but I hope not.

I was told that the crank pin itself is 1.77 but the rod is 1.89 to leave room for the bearings. Sound about right?....

Crower Cams & Equipment - Honda Connecting Rods

enough said

Thank you sir for the clear up. Now, if someone wants to buy some rods..... Let me know.

Robbie