FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
11-25-2008, 07:17 PM
#1
0.5 BAR
Thread Starter
Join Date: Jan 2005
Posts: 108
FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
Located in 10954 NY. Prefer local pickup on the big stuff (tranny/quaife, traction bars, axles) but will ship at buyer's expense.
Some parts will be available mid-to-end of December, 2008.Posting now to see if anyone has interest. Pics will come later (parts are still in the car). Selling because I'm parting my car and these parts are not included with the shell I'm selling.
- OBD1 GSR complete longblock (no harness) - Will get more info on this later. Local pickup only
- JimFab traction bars for EG/DC/and I think EK - only been on the car since spring, before that, they sat in my house. Great condition. $250 + shipping, Local pickup preferred
- B18B tranny + Quaife LSD Pending- Tranny has about 120K miles on it. Quaife installed with flat bearings. I'm pretty sure the 1-2 sleeve is dead - hard to shift into first and quickly into 2nd. You can still do it, its just difficult. 3rd gear grind at high RPM shift. GSR 5th gear. Brand new axle seals, spring of 2008. Legit, with papers.
$650 Local pickup ONLY - will drive ~20 miles to meet someone for the whole tranny + quaife. I don't feel like pulling the quaife out. Warranty card was sent in under my name, will give info to buyer. Bought from Earl when he first started selling Quaifes back in like 2003-2004. Quaife has around 5k miles on it. Application: B18B, B16 trannies. GSR and ITR use a different model number, not sure why.
- Apexi AVCR - screen has a few minor scratches, nothing major. Including harness, boost control solenoid. No box or instruction manual. $215 + shipping
- OEM Bseries axles + halfshaft. Upgraded to DSS stage 1 on my car, kept these as spares in case I ever broke the DSS'. $125 + shipping, Local pickup preferred - Available now
----------------
That was the old stuff. Here's more crap I found in the garage
Stock EG hatch upper control arms - $Make offer
EG Lower ball joints, New, opened one before seeing I didn't need to replace them $40 shipped each or $70 shipped if you buy the pair
Distributor Ignitor, ~50k miles on it (worked fine, I swapped it out with a new one when I was rebuilding my distributor for the sake of having all new parts) - $45 shipped obo
GSR Cap, rotor, gasket, rotor screw $25 shipped
PLX M-300 Wideband, 0-1v and 0-5v output (white and gray wires). I put a fuse in the power wiring cuz there's no fuses and I had blown one up previously cuz I'm retarded and put neg on pos and pos on neg on the battery lol. Works fine, no O2 sensor cuz its older and I ran race gas thru it. You can buy a new Bosch o2 sensor from http://www.1stvwparts.com/policy.html they sell them for like 40 each vs the 55-60 they usually go for. Just say you are an online shopper and they'll toss you the discount. Part number 021-906-262-B
$200 shipped obo
Some parts will be available mid-to-end of December, 2008.Posting now to see if anyone has interest. Pics will come later (parts are still in the car). Selling because I'm parting my car and these parts are not included with the shell I'm selling.
- OBD1 GSR complete longblock (no harness) - Will get more info on this later. Local pickup only
- JimFab traction bars for EG/DC/and I think EK - only been on the car since spring, before that, they sat in my house. Great condition. $250 + shipping, Local pickup preferred
- B18B tranny + Quaife LSD Pending- Tranny has about 120K miles on it. Quaife installed with flat bearings. I'm pretty sure the 1-2 sleeve is dead - hard to shift into first and quickly into 2nd. You can still do it, its just difficult. 3rd gear grind at high RPM shift. GSR 5th gear. Brand new axle seals, spring of 2008. Legit, with papers.
$650 Local pickup ONLY - will drive ~20 miles to meet someone for the whole tranny + quaife. I don't feel like pulling the quaife out. Warranty card was sent in under my name, will give info to buyer. Bought from Earl when he first started selling Quaifes back in like 2003-2004. Quaife has around 5k miles on it. Application: B18B, B16 trannies. GSR and ITR use a different model number, not sure why.
- Apexi AVCR - screen has a few minor scratches, nothing major. Including harness, boost control solenoid. No box or instruction manual. $215 + shipping
- OEM Bseries axles + halfshaft. Upgraded to DSS stage 1 on my car, kept these as spares in case I ever broke the DSS'. $125 + shipping, Local pickup preferred - Available now
----------------
That was the old stuff. Here's more crap I found in the garage
Stock EG hatch upper control arms - $Make offer
EG Lower ball joints, New, opened one before seeing I didn't need to replace them $40 shipped each or $70 shipped if you buy the pair
Distributor Ignitor, ~50k miles on it (worked fine, I swapped it out with a new one when I was rebuilding my distributor for the sake of having all new parts) - $45 shipped obo
GSR Cap, rotor, gasket, rotor screw $25 shipped
PLX M-300 Wideband, 0-1v and 0-5v output (white and gray wires). I put a fuse in the power wiring cuz there's no fuses and I had blown one up previously cuz I'm retarded and put neg on pos and pos on neg on the battery lol. Works fine, no O2 sensor cuz its older and I ran race gas thru it. You can buy a new Bosch o2 sensor from http://www.1stvwparts.com/policy.html they sell them for like 40 each vs the 55-60 they usually go for. Just say you are an online shopper and they'll toss you the discount. Part number 021-906-262-B
$200 shipped obo
11-29-2008, 06:22 PM
#6
0.5 BAR
Thread Starter
Join Date: Jan 2005
Posts: 108
Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
88dx - you mean the LS 5th gear?
I have one of the gears, I lost the other lol...dunnowhich shaft its for but if you want it, just pay for shipping and you can have it
the gsr 5th is still inside the tranny case
delta, you can DL the instal manual from apexi's site
http://www.apexi-usa.com/pdfWiring/8.pdf
I have one of the gears, I lost the other lol...dunnowhich shaft its for but if you want it, just pay for shipping and you can have it
the gsr 5th is still inside the tranny case
delta, you can DL the instal manual from apexi's site
http://www.apexi-usa.com/pdfWiring/8.pdf
11-30-2008, 08:41 PM
#10
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
Originally Posted by Toda Party
Works fine, no O2 sensor cuz its older and I ran race gas thru it. You can buy a new Bosch o2 sensor from http://www.1stvwparts.com/policy.html they sell them for like 40 each vs the 55-60 they usually go for. Just say you are an online shopper and they'll toss you the discount. Part number 021-906-262-B
Originally Posted by chris
Jim fab stuff is nice to bad he went out of business
