FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

Located in 10954 NY. Prefer local pickup on the big stuff (tranny/quaife, traction bars, axles) but will ship at buyer's expense.


Some parts will be available mid-to-end of December, 2008.Posting now to see if anyone has interest. Pics will come later (parts are still in the car). Selling because I'm parting my car and these parts are not included with the shell I'm selling.


- OBD1 GSR complete longblock (no harness) - Will get more info on this later. Local pickup only

- JimFab traction bars for EG/DC/and I think EK - only been on the car since spring, before that, they sat in my house. Great condition. $250 + shipping, Local pickup preferred

- B18B tranny + Quaife LSD Pending- Tranny has about 120K miles on it. Quaife installed with flat bearings. I'm pretty sure the 1-2 sleeve is dead - hard to shift into first and quickly into 2nd. You can still do it, its just difficult. 3rd gear grind at high RPM shift. GSR 5th gear. Brand new axle seals, spring of 2008. Legit, with papers.
$650 Local pickup ONLY - will drive ~20 miles to meet someone for the whole tranny + quaife. I don't feel like pulling the quaife out. Warranty card was sent in under my name, will give info to buyer. Bought from Earl when he first started selling Quaifes back in like 2003-2004. Quaife has around 5k miles on it. Application: B18B, B16 trannies. GSR and ITR use a different model number, not sure why.

- Apexi AVCR - screen has a few minor scratches, nothing major. Including harness, boost control solenoid. No box or instruction manual. $215 + shipping

http://img.photobucket.com/albums/v3...y/P1000613.jpg


- OEM Bseries axles + halfshaft. Upgraded to DSS stage 1 on my car, kept these as spares in case I ever broke the DSS'. $125 + shipping, Local pickup preferred - Available now


----------------

That was the old stuff. Here's more crap I found in the garage

Stock EG hatch upper control arms - $Make offer

http://img.photobucket.com/albums/v3...y/P1000616.jpg


EG Lower ball joints, New, opened one before seeing I didn't need to replace them $40 shipped each or $70 shipped if you buy the pair

http://img.photobucket.com/albums/v3...y/P1000617.jpg


Distributor Ignitor, ~50k miles on it (worked fine, I swapped it out with a new one when I was rebuilding my distributor for the sake of having all new parts) - $45 shipped obo

http://img.photobucket.com/albums/v3...y/P1000618.jpg


GSR Cap, rotor, gasket, rotor screw $25 shipped

http://img.photobucket.com/albums/v3...y/P1000619.jpg


PLX M-300 Wideband, 0-1v and 0-5v output (white and gray wires). I put a fuse in the power wiring cuz there's no fuses and I had blown one up previously cuz I'm retarded and put neg on pos and pos on neg on the battery lol. Works fine, no O2 sensor cuz its older and I ran race gas thru it. You can buy a new Bosch o2 sensor from http://www.1stvwparts.com/policy.html they sell them for like 40 each vs the 55-60 they usually go for. Just say you are an online shopper and they'll toss you the discount. Part number 021-906-262-B

$200 shipped obo

http://img.photobucket.com/albums/v3...y/P1000620.jpg

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

added more parts

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

Bump for Toda, good guy 8)

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

Do you happent to have the 5th Gear out of that B18b Tranny?

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

Install manual comes with the boost controller? ???

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

88dx - you mean the LS 5th gear?

I have one of the gears, I lost the other lol...dunnowhich shaft its for but if you want it, just pay for shipping and you can have it

the gsr 5th is still inside the tranny case




delta, you can DL the instal manual from apexi's site

http://www.apexi-usa.com/pdfWiring/8.pdf

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

Yes

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

lemme look around my garage, ill post again tomorrow afternoon

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m20
 

Jim fab stuff is nice to bad he went out of business

Re: FS: Bseries Axles, OBD1 GSR longblock, JimFab tbars, Quaife(LS/b16), PLX m200
 

They sell them for $79 + shipping. Prices went up early in the summer, the local dealer thinks they are worth $155.


Not out of business, per se. His work was top notch and people with money kept him too busy to bother fiddling with the $5 Honduh market.