Well I have a bunch of stuff I need to get rid of. All these things are best offer.

Set of Used 9:1 Arias Piston with rings. They have a piston coating and were in my B16 with a cracked sleeve. The pistons are still in usable shape. The Rods are perfect and have the newer rod bolts.

$400 for the set (FIRM) Pistons are Pending.

Perfect B16A2 crank. It was in my drag car when I cracked a sleeve. The crank is in perfect shape. It only has 20 miles on it tops. It was just micropolished. $60 plus shipping.

D16Y7 Head Perfect Shape <100,000 miles $50


CX motor. 80,000 Miles. Runs perfect. $50


Also have some A/C stuff. Best offer.


D16 Cam Gear. It is an OBX-R cam gear. Had it on my built single cam such a long time ago. I replace the allen screws with bigger ones. It is a good piece. $40

DSM BOV

$40 shipped.

 

Bump for my boy. Good seller/guy to deal with. I meant to ask you if you ever got out to Cecil with your Drag Hatch or the numbers it laid down.


JP

 

I never got a full pass yet even in the 1/8. The best in the 1/8 coasting after mid 3rd was a 7.9.

Thanks for the bump.

 

do a hundred shipped on the cx motor? pm me

 

pmed you.

 

how many miles on the rods and pistons?

 

They were in a motor through breakin and dyno. Then were swapped out for a bigger bore and higher compression.

 

do they have an estimate hp rating?

 

Since they are SRP pistons, they aren't as strong as some of the counter parts, such as CP or JE (who makes SRP).

They should be good for a mild street car build. They won't have the piston slap of most forged pistons because of the density of the metal that is used. So I would estimate right around 400 being the max I would take them to.

 

how much for them if i pick them up? since i go to lyco and u could just bring them up btw im cody (saturn boys) friend that hes always with up at college