ARIAS Pistons - Eagle Rods - DSM BOV - AEM FPR - B16 Crank - Cam Gear - ETC
 

Well I have a bunch of stuff I need to get rid of. All these things are best offer.

Set of Used 9:1 Arias Piston with rings. They have a piston coating and were in my B16 with a cracked sleeve. The pistons are still in usable shape. The Rods are perfect and have the newer rod bolts.

$400 for the set (FIRM) Pistons are Pending.

Perfect B16A2 crank. It was in my drag car when I cracked a sleeve. The crank is in perfect shape. It only has 20 miles on it tops. It was just micropolished. $60 plus shipping.

D16Y7 Head Perfect Shape <100,000 miles $50
http://www.j-k-tuning.com/images/For_Sale/D16_head.JPG

CX motor. 80,000 Miles. Runs perfect. $50
http://www.j-k-tuning.com/images/For_Sale/D15.JPG

Also have some A/C stuff. Best offer.
http://www.j-k-tuning.com/images/For_Sale/AC.JPG

D16 Cam Gear. It is an OBX-R cam gear. Had it on my built single cam such a long time ago. I replace the allen screws with bigger ones. It is a good piece. $40

DSM BOV

$40 shipped.

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - E
 

Bump for my boy. Good seller/guy to deal with. I meant to ask you if you ever got out to Cecil with your Drag Hatch or the numbers it laid down.


JP

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - E
 

I never got a full pass yet even in the 1/8. The best in the 1/8 coasting after mid 3rd was a 7.9.

Thanks for the bump. :)

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - ETC
 

do a hundred shipped on the cx motor? pm me

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - ETC
 

pmed you.

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - ETC
 

how many miles on the rods and pistons?

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - ETC
 

They were in a motor through breakin and dyno. Then were swapped out for a bigger bore and higher compression.

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - ETC
 

do they have an estimate hp rating?

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - ETC
 

Since they are SRP pistons, they aren't as strong as some of the counter parts, such as CP or JE (who makes SRP).

They should be good for a mild street car build. They won't have the piston slap of most forged pistons because of the density of the metal that is used. So I would estimate right around 400 being the max I would take them to.

Re: SRP Pistons - Eagle Rods - Edelbrock TB - AEM FPR - B16 Crank - Cam Gear - ETC
 

how much for them if i pick them up? since i go to lyco and u could just bring them up btw im cody (saturn boys) friend that hes always with up at college