Thanks for the write-up Jeff

Reply Subscribe

Thread Tools

Search this Thread

Aug 31, 2003 | 11:22 PM

MikeJ-2009

Thread Starter

0.0 BAR

Joined: Feb 2003

Posts: 0

Thanks for the write-up Jeff

So its a nice labor day weekend. I figure I'll tear down my d16y8 project block and notch for pistons and drill and tap for my endyne posts (arriving tues.) I hop online to get the instructions from Jeff's write-up, and there's no mention of what size to drill and tap the holes!!!!! So I just wanted to give a fat shout out to Jeff for his informative write-up. :P

Sep 1, 2003 | 01:04 AM

TLshizz

0.5 BAR

Joined: Apr 2003

Posts: 156

Re:Thanks for the write-up Jeff

lol, yeah some words of wisdom please :

D, yeah it'd like to know too, , , ,

Sep 1, 2003 | 01:35 AM

BLACKSI

3.0 BAR

Joined: Dec 2002

Posts: 2,101

Re:Thanks for the write-up Jeff

no need for gayness

Beau

Sep 1, 2003 | 10:09 AM

scttydb411

1.5 BAR

Joined: Dec 2002

Posts: 1,008

Re:Thanks for the write-up Jeff

are all the posts the same size and thread pitch? i'd wait until they get there just in case. it'd suck to ruin the block if they have different one's.

Sep 1, 2003 | 10:48 AM

mikefxu

Guest

Posts: n/a

Re:Thanks for the write-up Jeff

let know how the d16y8 pinning goes. i wanna do to my 2000 y7 so i figure they are exactly the same block wise. let me know if that d16y8 vtec also has piston squirters

Sep 1, 2003 | 11:32 AM

turboboy

Guest

Posts: n/a

Re:Thanks for the write-up Jeff

notching for pistons?...u mean rods? Don't do too much, i think i did and im getting some piston slap

Sep 1, 2003 | 01:13 PM

shortyz

3.0 BAR

Joined: Dec 2002

Posts: 3,396

Re:Thanks for the write-up Jeff

Quote:

Originally Posted by BLACKSI

no need for gayness

Beau

lol im with you beau

Sep 1, 2003 | 01:45 PM

d16forlife

3.0 BAR

Joined: Jun 2003

Posts: 6,843

Re:Thanks for the write-up Jeff

[quote ]Posted by: Stealthmode
there's no mention of what size to drill and tap the holes!!!!! Wouldnt that depend on the size of the posts that you get.Im pretty shure they come in different sizes.

Sep 1, 2003 | 01:52 PM

turboboy

Guest

Posts: n/a

Re:Thanks for the write-up Jeff

well im assuming theres only one size because all i asked for were posts, all i did was take them to the parts store and ask for a tap

Sep 1, 2003 | 02:59 PM

#10

MikeJ-2009

Thread Starter

0.0 BAR

Joined: Feb 2003

Posts: 0

Re:Thanks for the write-up Jeff

Yes, notching for rods.lol. All I did was order the pins, too. No mention of different sizes. I'll post pics when I get this shindig finished. I'LL post the tap sizes when I get done.

Reply Share

First
Prev
1 / 2
Next
Last