ok since i discovered this hole on my transmission, i've been shoppin' around and can't find a manual Accord, I thought about get the hole welded. The car runs fine, the tranny shifts great it's just that hole.

 

ya you can have it welded should run around 150 bucks+

 

jb weld to the rescue

 

I have hydro dx/lx accord transmissions

 

yeah, chris has everything, should ask him before you say ya cant find a trans.

 

You need to find someone with a TIG welder and have them weld it up with a Certanuim filler rod

 

Lemme guess, your diff exploded? I found some aluminum and bashed it into the appropriate shape, then jb welded the **** out of it. Its pretty solid.

 

jam a chicken bone in it.

 

I fixed an LS tranny with the same problem. GUy gets a new clutch installed, something explodes inside all the oil leaks out.

I took a look underneath and there was a dime sized hole where the diff is. Opened that bitch up and sure enough the input shaft bearing fell apart and shot out a ball bearing that the diff cought and blasted through the housing.

I just cleaned up the surrounding area put some masking tape outside the tranny's hole, and poured in the JB weld. I heated it with a blowdryer, and after a few hours bolted everything back up. and that ---- ran fine with no leaks.