how to install s-afc on 95 integra ls pics

Reply Subscribe

Thread Tools

Search this Thread

May 27, 2003 | 02:50 AM

Sniperpain

Thread Starter

0.5 BAR

Joined: May 2003

Posts: 98

how to install s-afc on 95 integra ls *pics*

hope this helps you guys out, since hmt helped me out

peace!

May 27, 2003 | 05:08 PM

tranceminister

3.0 BAR

Joined: Mar 2003

Posts: 5,272

Re:how to install s-afc on 95 integra ls *pics*

Hey thanks SNiperpain, it helps me out because I'll be installing one in a few days on an integra.

May 27, 2003 | 05:54 PM

88crxSi

3.0 BAR

Joined: Feb 2003

Posts: 9,089

Re:how to install s-afc on 95 integra ls *pics*

Quote:

Originally Posted by Sniperpain

a little easier to view...
pink, orange, and blue was not used!

new box!

ecu located under glove box behind kick panel

ecu unbolted

white with yellow stripe

red with black stripe

yellow with black stripe

yellow with blue stripe

brown with black stripe

all connected

ran wires behind glove box

installed

testing for no oder, no noise, and no initializing

HURRAY!

hope this helps you guys out, since hmt helped me out

peace!

May 28, 2003 | 06:48 AM

DOHCZCEF9

1.0 BAR

Joined: Mar 2003

Posts: 305

Re:how to install s-afc on 95 integra ls *pics*

Hey that white wire it looked like you just cut the wire and then re-routed it threw the AFC is that what you did and what wire is that for ? Thanks

May 28, 2003 | 08:31 AM

88crxSi

3.0 BAR

Joined: Feb 2003

Posts: 9,089

Re:how to install s-afc on 95 integra ls *pics*

the white wire is probably the MAP signal. The afc reads that signal, then sends a modified signal to the ecu.

May 28, 2003 | 09:32 AM

DOHCZCEF9

1.0 BAR

Joined: Mar 2003

Posts: 305

Re:how to install s-afc on 95 integra ls *pics*

So with just the map wire do you have to cut it and re-route it threw the AFC much like with coolant lines or am I just looking at the pic. wrong. Thanks

May 29, 2003 | 03:53 AM

Sniperpain

Thread Starter

0.5 BAR

Joined: May 2003

Posts: 98

Re:how to install s-afc on 95 integra ls *pics*

the white with yellow stripe is cut in half, then it CONNECTS to the white wire from the afc, then from the afc yellow wire CONNECTS to the other end of the white with yellow stripe near ecu harness.

sensor----white with yellow stripe-->
>--white afc----yellow afc--
>--white with yellow stripe-----ecu harness