how to install s-afc on 95 integra ls *pics*
#1
how to install s-afc on 95 integra ls *pics*
for yall that wanna be safe, and see an installed s-afc, heres some pics for yall... also u should go to http://www.apexi-usa.com/documentation.asp to download the installation/wiring document (in acrobat) just in case you want to be sure.
pink, orange, and blue was not used!
new box!
http://www.imagestation.com/picture/...c/fc10d3ef.jpg
ecu located under glove box behind kick panel
http://www.imagestation.com/picture/...9/fc10d3eb.jpg
ecu unbolted
http://www.imagestation.com/picture/...d/fc10d3e6.jpg
white with yellow stripe
http://www.imagestation.com/picture/...5/fc10d313.jpg
red with black stripe
http://www.imagestation.com/picture/...4/fc10d310.jpg
yellow with black stripe
http://www.imagestation.com/picture/...4/fc10d30e.jpg
yellow with blue stripe
http://www.imagestation.com/picture/...9/fc10d2cf.jpg
brown with black stripe
http://www.imagestation.com/picture/...e/fc10d2cd.jpg
all connected
http://www.imagestation.com/picture/...3/fc10d2cb.jpg
ran wires behind glove box
http://www.imagestation.com/picture/...3/fc10d299.jpg
installed
http://www.imagestation.com/picture/...a/fc10d297.jpg
testing for no oder, no noise, and no initializing
http://www.imagestation.com/picture/...1/fc10d295.jpg
HURRAY!
hope this helps you guys out, since hmt helped me out peace!
pink, orange, and blue was not used!
new box!
http://www.imagestation.com/picture/...c/fc10d3ef.jpg
ecu located under glove box behind kick panel
http://www.imagestation.com/picture/...9/fc10d3eb.jpg
ecu unbolted
http://www.imagestation.com/picture/...d/fc10d3e6.jpg
white with yellow stripe
http://www.imagestation.com/picture/...5/fc10d313.jpg
red with black stripe
http://www.imagestation.com/picture/...4/fc10d310.jpg
yellow with black stripe
http://www.imagestation.com/picture/...4/fc10d30e.jpg
yellow with blue stripe
http://www.imagestation.com/picture/...9/fc10d2cf.jpg
brown with black stripe
http://www.imagestation.com/picture/...e/fc10d2cd.jpg
all connected
http://www.imagestation.com/picture/...3/fc10d2cb.jpg
ran wires behind glove box
http://www.imagestation.com/picture/...3/fc10d299.jpg
installed
http://www.imagestation.com/picture/...a/fc10d297.jpg
testing for no oder, no noise, and no initializing
http://www.imagestation.com/picture/...1/fc10d295.jpg
HURRAY!
hope this helps you guys out, since hmt helped me out peace!
#3
Re:how to install s-afc on 95 integra ls *pics*
Originally Posted by Sniperpain
a little easier to view...
pink, orange, and blue was not used!
new box!
ecu located under glove box behind kick panel
ecu unbolted
white with yellow stripe
red with black stripe
yellow with black stripe
yellow with blue stripe
brown with black stripe
all connected
ran wires behind glove box
installed
testing for no oder, no noise, and no initializing
HURRAY!
hope this helps you guys out, since hmt helped me out peace!
pink, orange, and blue was not used!
new box!
ecu located under glove box behind kick panel
ecu unbolted
white with yellow stripe
red with black stripe
yellow with black stripe
yellow with blue stripe
brown with black stripe
all connected
ran wires behind glove box
installed
testing for no oder, no noise, and no initializing
HURRAY!
hope this helps you guys out, since hmt helped me out peace!
#7
Re:how to install s-afc on 95 integra ls *pics*
the white with yellow stripe is cut in half, then it CONNECTS to the white wire from the afc, then from the afc yellow wire CONNECTS to the other end of the white with yellow stripe near ecu harness.
sensor----white with yellow stripe-->
>--white afc----yellow afc--
>--white with yellow stripe-----ecu harness
sensor----white with yellow stripe-->
>--white afc----yellow afc--
>--white with yellow stripe-----ecu harness