I am looking for the pinouts for the zc distributor to work on an hf round clip. I have searched everywhere and i cant seem to find anything. I just replaced the distributor in the zc the bearing in the old one went bad and i gave them the clip that went to give them the core i managed to scavange another clip but i forgot were all the pins go on the distributor. Any links or post anything at this time would work. And I had a quick question before i install the distributor. Do i need to do anything special b4 i stab the damn Dizzy. Any of your input would work great Thanks.

 

do u still have the hf dist? will that not fit?

 

go to http://thenew.gamesbbs.com/~dmoore/zc-phase3.htm there is a pic at the bottom. im pretty sure the hf and si wiring harness is pretty much the same since they are both mpfi.

 

we are using the engine harness off the hf and using the Zc dizzy so thats why the plugs are different the zc dizzy has a square 5 wire plug and the hf has this 9 wire so b4 it was repinned in the round clip to fit the hf harness

 

thanks im trying it right now hopefully i can get this bad boy to tdc and time it

 

Either match up wiring colors, or use the HF cam tower on the ZC's intake cam so you can run an HF/Si distributor like a normal person.

 

damn i would be 230 dollars richer if i would have posted this yesterday. next time i will keep that in mide davis. As of now i will give my car some boost lovin once i get it started. I am pretty sure i can get the wires going it only two white wires that i have to switch around. Thanks everyone

 

FYI I have four or five ZC/88-89 D16A1 distributors, lacking coils and ignitors. I have zero interest in shipping, but I'd pass them on free if someone would be interested in picking them up.

 

If i find anybody that needs one i will let you know appreciate the info on the dizzy though now i have a spare . This wiring should be to hard the si and hf are practically the same so i should be able to get her up and running when i get home from work. Once again appreciate the info i