91 hf to zc swap
 

I am looking for the pinouts for the zc distributor to work on an hf round clip. I have searched everywhere and i cant seem to find anything. I just replaced the distributor in the zc the bearing in the old one went bad and i gave them the clip that went to give them the core i managed to scavange another clip but i forgot were all the pins go on the distributor. Any links or post anything at this time would work. And I had a quick question before i install the distributor. Do i need to do anything special b4 i stab the damn Dizzy. Any of your input would work great Thanks.

Re: 91 hf to zc swap
 

do u still have the hf dist? will that not fit?

Re: 91 hf to zc swap
 

go to http://thenew.gamesbbs.com/~dmoore/zc-phase3.htm there is a pic at the bottom. im pretty sure the hf and si wiring harness is pretty much the same since they are both mpfi.

Re: 91 hf to zc swap
 

we are using the engine harness off the hf and using the Zc dizzy so thats why the plugs are different the zc dizzy has a square 5 wire plug and the hf has this 9 wire so b4 it was repinned in the round clip to fit the hf harness

Re: 91 hf to zc swap
 

thanks im trying it right now hopefully i can get this bad boy to tdc and time it

Re: 91 hf to zc swap
 

Either match up wiring colors, or use the HF cam tower on the ZC's intake cam so you can run an HF/Si distributor like a normal person.

Re: 91 hf to zc swap
 

damn i would be 230 dollars richer if i would have posted this yesterday. next time i will keep that in mide davis. As of now i will give my car some boost lovin once i get it started. I am pretty sure i can get the wires going it only two white wires that i have to switch around. Thanks everyone

Re: 91 hf to zc swap
 

FYI I have four or five ZC/88-89 D16A1 distributors, lacking coils and ignitors. I have zero interest in shipping, but I'd pass them on free if someone would be interested in picking them up.

Re: 91 hf to zc swap
 

If i find anybody that needs one i will let you know appreciate the info on the dizzy though now i have a spare . This wiring should be to hard the si and hf are practically the same so i should be able to get her up and running when i get home from work. Once again appreciate the info i ;D