i have a 93 del sol with a z6, i picked up a d16 y8 that used to be in a 91 hatch for a great price. heres my problem, the engine sat under a tarp and rusted the pressure plate and clutch assembaly, but i put a clutchmasters stage 2 (i still hate saying "stage something" it sounds so ricy) on the z6 a month ago. but when i ordered the clutch, there were 2 part #s for a 92-95 and a 96-2000. so im guessing the clutch does not swap to the y8? the flywheel and clutch look about the same, bolt pattern and all but does anyone know for sure if the clutches and flywheels are interchangeable between these motors? a z6 tranny bolts up as well right?

thanx

 

all d parts are interchangable
Its best to keep some parts the same
so if the flywheel is a z6 put the 92-95 cluch on it.

 

all Z6 and Y8 use the same clutch

 

"all d parts are interchangable
Its best to keep some parts the same
so if the flywheel is a z6 put the 92-95 cluch on it."

 

So D15 rods will fit into a D16 motor using D17 pistons?

A D16 rods bolt right onto a D13/D14/D15 HF crank?

Not as interchangable as you think.

 

the y8 flywheel looks like its 1/4" thicker than the z6 one? any thoughts on this. can i use the z6 flywheel?