**NEW INFO** URGENT HELP NEEDED, Intermediate shaft issue!
05-07-2005, 08:08 AM
#1
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
**NEW INFO** URGENT HELP NEEDED, Intermediate shaft issue!
*SEE BELOW**
Ok, so I converted a auto DX to a manual SOHC ZC.
I had the motor before, and I went to the JDM importer to get a SOHC ZC tranny.
The tranny looks fine, it's not LSD or anything, it's cable of course, now I take my axles that I had in my old car which was a dx 5 spd and the axles are probably 1-2mm in diameter too small.
What axles do I need? I had put a USDM Si tranny in my old civic with these axles and there weren't any problems.
Do I somehow need to run teg ales with a intermediate shaft? It thought this was only for a DOHC ZC tranny.
Please help. I can take pics if needed.
Jay
Ok, so I converted a auto DX to a manual SOHC ZC.
I had the motor before, and I went to the JDM importer to get a SOHC ZC tranny.
The tranny looks fine, it's not LSD or anything, it's cable of course, now I take my axles that I had in my old car which was a dx 5 spd and the axles are probably 1-2mm in diameter too small.
What axles do I need? I had put a USDM Si tranny in my old civic with these axles and there weren't any problems.
Do I somehow need to run teg ales with a intermediate shaft? It thought this was only for a DOHC ZC tranny.
Please help. I can take pics if needed.
Jay
05-07-2005, 09:49 AM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: URGENT HELP NEEDED, Axles don't fit in TRANNY!
Originally Posted by Jays91DXhatch
Do I somehow need to run teg ales with a intermediate shaft? It thought this was only for a DOHC ZC tranny.
05-07-2005, 04:34 PM
#3
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
Re: URGENT HELP NEEDED, Axles don't fit in TRANNY!
I'm not sure, I asked for a SOHC ZC tranny and this is what they gave me.
It's an L3 tranny but that's what they all are.
Would the 88-89 axles also need the intermediate shaft?
So that means I have to get the ZC int. shaft I couldn't use the teg one right? That BLOWS! At least i know it's a ZC tranny and not a DX that they sold me. :s
It's an L3 tranny but that's what they all are.
Would the 88-89 axles also need the intermediate shaft?
So that means I have to get the ZC int. shaft I couldn't use the teg one right? That BLOWS! At least i know it's a ZC tranny and not a DX that they sold me. :s
05-07-2005, 04:41 PM
#4
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
Re: URGENT HELP NEEDED, Axles don't fit in TRANNY!
I found this from the following website: http://www.enginereplacement.com/htd...vic_crx_zc.htm
So it looks like the JDM tranny's all need the intermediate shaft regardless if it's ZOHC or DOHC.
DOH!
If you are useing your stock transmission or any other US L3 transmission your stock axles will work. For Japanese ZC transmissions use ZC intermediate shaft and two right hand axles from your model car with 90-93 Integra inner joints. 90-93 Integra axles can be modified to work also. If your car is either a CRX HF, or Civic Standard model you will also need to replace the knuckles and hubs from any other Civic or CRX model to use the modified 90-93 Integra axles.
DOH!
05-07-2005, 11:39 PM
#5
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
Re: URGENT HELP NEEDED, Axles don't fit in TRANNY!
Trying to find a intermediate shaft SUCKS.
couldn't I just use the civic axles with teg inners rather they run the int. shaft?
If not I have 2 right side civic axles and i can get some teg ones so I can make the hybrid axles if only I could find the darn intermediate shaft.
couldn't I just use the civic axles with teg inners rather they run the int. shaft?
If not I have 2 right side civic axles and i can get some teg ones so I can make the hybrid axles if only I could find the darn intermediate shaft.
05-08-2005, 08:23 PM
#9
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
Re: URGENT HELP NEEDED, Axles don't fit in TRANNY!
Problem with Ebay is me being from Canada, everyone jacks up the shipping charges, and then they ship UPS, and on someting that's $50 I get an extra $25 of brokerage charges when it gets here. no fun.
there's probably 40-50 JDM importers in the city, I'm sure i'll find one tomorrow i just wish i would have been able to get one this weekend.
no fun.there's probably 40-50 JDM importers in the city, I'm sure i'll find one tomorrow i just wish i would have been able to get one this weekend.
05-09-2005, 08:26 AM
#10
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
Re: URGENT HELP NEEDED, Axles don't fit in TRANNY!
HOLY FACK PEOPLE ARE DUMB!!!!!!
That and they can't speak english.
I'm having a hard time finding that int. shaft. Some places tell me I don't need it for the SOHC motor. I think I'm going to call a big name place in the US and find out from them.
That and they can't speak english.
I'm having a hard time finding that int. shaft. Some places tell me I don't need it for the SOHC motor. I think I'm going to call a big name place in the US and find out from them.
