I would like to know if this is a good turbo set up for my 2000 civic dx (d16y7)
turbo-t3/t4(wet floating bearing), 3"inlet, 2"outlet- .50a/r- .63 hot side stg 3 wheel, turbonetics cast housing
-38mm wastegate

-intercooler- 460mx160mmx90mm

 

turbo too big for that motor....laaaaaag monster.

 

Definitely way too large. At most I'd try one with a stage 1 wheel but it will still be a lag monster. You could try a .48 stage 1 wheel with a 50 trim compressor.

-Michael

 

like a 54 trim t3/t4 would be better.

maybe go down to a t3 60 trim, those are the ticket on stock d's

 

ok, what turbo would you suggest for this setup to work best

 

wrx, 14b, t3 .42/.48 or the t3 60 trim are all good turbos going small to large from left to right

 

The turbo you are talking about will work but need the push a little more exhaust out.
should be fine

 

what type of turbo manifold you thinking of running?
hf, log, ramhorn, etc.? what size exhaust and dp?

 

its the ss autoshit manifold.. and thier xs power turbo that the housings are epoxied together and blow apart aboke 10 psi. get a greddy kit

http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

 

---- greddy kits, wipe your *** with the money you're wasting

research and build your own, much more satisfying. besides, if you want a greddy kit you need to go to turbod16.com