chanceb18

I would like to know if this is a good turbo set up for my 2000 civic dx (d16y7)
turbo-t3/t4(wet floating bearing), 3"inlet, 2"outlet- .50a/r- .63 hot side stg 3 wheel, turbonetics cast housing
-38mm wastegate

-intercooler- 460mx160mmx90mm

FooK

turbo too big for that motor....laaaaaag monster.

hackish

Definitely way too large. At most I'd try one with a stage 1 wheel but it will still be a lag monster. You could try a .48 stage 1 wheel with a 50 trim compressor.

-Michael

FooK

like a 54 trim t3/t4 would be better.

maybe go down to a t3 60 trim, those are the ticket on stock d's

chanceb18

ok, what turbo would you suggest for this setup to work best

lkailburn

wrx, 14b, t3 .42/.48 or the t3 60 trim are all good turbos going small to large from left to right

THRESHOLD

The turbo you are talking about will work but need the push a little more exhaust out.
should be fine

whiterice

what type of turbo manifold you thinking of running?
hf, log, ramhorn, etc.? what size exhaust and dp?

sohcpwr

its the ss autoshit manifold.. and thier xs power turbo that the housings are epoxied together and blow apart aboke 10 psi. get a greddy kit

http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

90accordIHI

---- greddy kits, wipe your *** with the money you're wasting

research and build your own, much more satisfying. besides, if you want a greddy kit you need to go to turbod16.com