d16 turbo setup?
 

I would like to know if this is a good turbo set up for my 2000 civic dx (d16y7)
turbo-t3/t4(wet floating bearing), 3"inlet, 2"outlet- .50a/r- .63 hot side stg 3 wheel, turbonetics cast housing
-38mm wastegate

-intercooler- 460mx160mmx90mm

Re: d16 turbo setup?
 

turbo too big for that motor....laaaaaag monster.

Re: d16 turbo setup?
 

Definitely way too large. At most I'd try one with a stage 1 wheel but it will still be a lag monster. You could try a .48 stage 1 wheel with a 50 trim compressor.

-Michael

Re: d16 turbo setup?
 

like a 54 trim t3/t4 would be better.

maybe go down to a t3 60 trim, those are the ticket on stock d's

Re: d16 turbo setup?
 

ok, what turbo would you suggest for this setup to work best

Re: d16 turbo setup?
 

wrx, 14b, t3 .42/.48 or the t3 60 trim are all good turbos going small to large from left to right

Re: d16 turbo setup?
 

The turbo you are talking about will work but need the push a little more exhaust out.
should be fine

Re: d16 turbo setup?
 

what type of turbo manifold you thinking of running?
hf, log, ramhorn, etc.? what size exhaust and dp?

Re: d16 turbo setup?
 

its the ss autoshit manifold.. and thier xs power turbo that the housings are epoxied together and blow apart aboke 10 psi. get a greddy kit

http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

Re: d16 turbo setup?
 

---- greddy kits, wipe your ass with the money you're wasting

research and build your own, much more satisfying. besides, if you want a greddy kit you need to go to turbod16.com