can I use my p28 on dx motor
Thread Starter
0.0 BAR
Joined: Oct 2004
Posts: 0
can I use my p28 on dx motor
okay I got a p28 wit uberdata but I blew the z6 I got a dx in the car now and was wonderin if I could use the p28 still I know I through a code for the vtec but will that hurt anything thanx. Oh yeah can anyone point me in a good dircetion to get a chip burner
0.0 BAR
Joined: Jan 2005
Posts: 0
Re:can I use my p28 on dx motor
all you'll gain is a 6800 revlimiter instead of 6500, and no speedlimiter.
You'll get the CEL codes, but they have no effect.
I did this 6+ years ago, and running the same thing now that my D15Beast7 is back in.
You'll get the CEL codes, but they have no effect.
I did this 6+ years ago, and running the same thing now that my D15Beast7 is back in.
3.0 BAR
Joined: May 2004
Posts: 5,032
Re:can I use my p28 on dx motor
There are many burners that will fill your needs. The two that seem to work the best and are within a decent price range are the willem and the Moates.
Cost:
The moates "Burn1" is $85 on moates.net
Willem is about $50 on eBay.
Compatibility:
They both work with the major chips you will need. The willem does more chips, but you will never use them for automotive stuff.
Connections:
The willem needs a serial cable and a USB cable (for power)
The moates take only one USB for everything (very nice)
Software:
The willem comes with software that is a little more confusing because it is made to work with hundreds of chips.
The moates software is simple because it is made with TurboEdit/Uberdata guys in mind.
Overall I would go with the Moates. I have owned both, and I just like the ease and tangle free operation of the moates.
If all you want is cheap, then use the willem
BTW: kev just did a big write-up on teh willem operation
https://www.homemadeturbo.com/forum/...threadid=35497
Cost:
The moates "Burn1" is $85 on moates.net
Willem is about $50 on eBay.
Compatibility:
They both work with the major chips you will need. The willem does more chips, but you will never use them for automotive stuff.
Connections:
The willem needs a serial cable and a USB cable (for power)
The moates take only one USB for everything (very nice)
Software:
The willem comes with software that is a little more confusing because it is made to work with hundreds of chips.
The moates software is simple because it is made with TurboEdit/Uberdata guys in mind.
Overall I would go with the Moates. I have owned both, and I just like the ease and tangle free operation of the moates.
If all you want is cheap, then use the willem
BTW: kev just did a big write-up on teh willem operation
https://www.homemadeturbo.com/forum/...threadid=35497
Thread
Thread Starter
Forum
Replies
Last Post
BRIOHATCH
Turbo Parts For Sale
3
Aug 17, 2007 05:03 AM
Walter
Engine Management
10
Apr 30, 2006 11:32 AM
95civicLX
Hybrid/Tech
2
Oct 25, 2005 07:50 PM
ted5
Hybrid/Tech
3
Jan 12, 2005 08:38 PM
