can I use my p28 on dx motor
 

okay I got a p28 wit uberdata but I blew the z6 I got a dx in the car now and was wonderin if I could use the p28 still I know I through a code for the vtec but will that hurt anything thanx. Oh yeah can anyone point me in a good dircetion to get a chip burner

Re:can I use my p28 on dx motor
 

sure it will work....

Re:can I use my p28 on dx motor
 

just disable vtec.

Re:can I use my p28 on dx motor
 

how do I do that I can't burn chips?

Re:can I use my p28 on dx motor
 

it will plug in you will just throw a code 21 vtec spool sillynoid

Re:can I use my p28 on dx motor
 

I know I will through a code I said that at the top you were alot of help

Re:can I use my p28 on dx motor
 

it will be fine it just wont read the second set of maps for vtec

Re:can I use my p28 on dx motor
 

Buy a burner...

Re:can I use my p28 on dx motor
 

all you'll gain is a 6800 revlimiter instead of 6500, and no speedlimiter.

You'll get the CEL codes, but they have no effect.

I did this 6+ years ago, and running the same thing now that my D15Beast7 is back in.

Re:can I use my p28 on dx motor
 

There are many burners that will fill your needs. The two that seem to work the best and are within a decent price range are the willem and the Moates.

Cost:
The moates "Burn1" is $85 on moates.net
Willem is about $50 on eBay.

Compatibility:
They both work with the major chips you will need. The willem does more chips, but you will never use them for automotive stuff.

Connections:
The willem needs a serial cable and a USB cable (for power)
The moates take only one USB for everything (very nice)

Software:
The willem comes with software that is a little more confusing because it is made to work with hundreds of chips.
The moates software is simple because it is made with TurboEdit/Uberdata guys in mind.

Overall I would go with the Moates. I have owned both, and I just like the ease and tangle free operation of the moates.

If all you want is cheap, then use the willem

BTW: kev just did a big write-up on teh willem operation
https://www.homemadeturbo.com/forum/...threadid=35497