does it matter which wires you use from the the injector itself i know one wire from the injector goes tot he ecu and the other to the resistor box but does it matter which one?

 

i need to know i looked in the FAQ but no luck the internet isnt any help either this is the last thing i have to do to finish my setup

 

http://www.hstuners.com/forums/showt...threadid=11436

 

i used this diagram [imghttp://repo.jackmoves.com/albums/album153/resistor_box_wiring.jpg][/img] and i was wondering if it mattered which way the blue and the yellow/black wires were hooked up? like could the blue wire go to the resister box and the yellow/black wire go to the ecu?

 

that works but you dont really need to use all 4 going to the resistor box. jus 2 will do fine. then run those red wires to the old wires on the injectors "yellow wire" and leave those colored ones cuz those are going to the ecu

 

i beleive there is a dsm injector wrtie up on the main page

 

you need to use the 4 leads that already go to the dead plug, get yourself a tester that will give you the beeps when you test for continuity in a wire, and find the 4 in that plug that have a connection with the injector clips, those are your 4 wires, yes it matters.

 

hahaha..i like the diagram...very intersteing...

 

www.geocities.com/uncgolf25

Go to the how to "DSM Injectors"

That is my persoanl Page.