wiring 450cc injectors
does it matter which wires you use from the the injector itself i know one wire from the injector goes tot he ecu and the other to the resistor box but does it matter which one?
|
Re:wiring 450cc injectors
i need to know i looked in the FAQ but no luck the internet isnt any help either this is the last thing i have to do to finish my setup
|
Re:wiring 450cc injectors
|
Re:wiring 450cc injectors
i used this diagram [imghttp://repo.jackmoves.com/albums/album153/resistor_box_wiring.jpg][/img] and i was wondering if it mattered which way the blue and the yellow/black wires were hooked up? like could the blue wire go to the resister box and the yellow/black wire go to the ecu?
|
Re:wiring 450cc injectors
http://repo.jackmoves.com/albums/alb...box_wiring.jpg
that works but you dont really need to use all 4 going to the resistor box. jus 2 will do fine. then run those red wires to the old wires on the injectors "yellow wire" and leave those colored ones cuz those are going to the ecu |
Re:wiring 450cc injectors
i beleive there is a dsm injector wrtie up on the main page
|
Re:wiring 450cc injectors
you need to use the 4 leads that already go to the dead plug, get yourself a tester that will give you the beeps when you test for continuity in a wire, and find the 4 in that plug that have a connection with the injector clips, those are your 4 wires, yes it matters.
|
Re:wiring 450cc injectors
hahaha..i like the diagram...very intersteing... ;)
|
Re:wiring 450cc injectors
|
All times are GMT -5. The time now is 12:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands