Ok, what size does the male connection have to be for the oil line going into the block and the female T for the pressure sensor. (I know they will be the same size) Most of the stuff here is for D series engines. All the stuff I found on the search where for SOHC d series or DOHC ZC motors. What about the good old B16, or is it the same size? Even the damn haynes manual only has the SOHC models in it.

 

1/8th BSPT male

 

order a 1/8 inch bspt to npt adapter from summit (autometer makes it). the rest of the fittings you can get from the hardware store. 1/8 npt pipe, 1/8 npt t, and 1/8 npt nipple. the sensor will screw into the brass t with effort, but you don't want to cut corners and put a npt fitting into the block and strip out the block. order the adapter. it's only 10 bucks.

 

Order it at www.mcmaster.com they are like 4 bucks

 

Can you make a more direct link, ther are so many links on that page. www.mcmaster.com/...?

Thanks

 

its hard to navigate that gay website, here is the part number

4092 k11

stainless steel bsp 1/8 to 1/8 npt

I lied, their 5.68 a peice