ZC nad DX Automatics!!!HELP!!!!!
10-05-2003, 03:03 PM
#1
0.5 BAR
Thread Starter
Join Date: Apr 2003
Posts: 52
ZC nad DX Automatics!!!HELP!!!!!
ok basically i just did a zc swap into my dx automatic.. and i am running a pr4 ecu from a 5spd integra.. however i am having tranny shifting problems..
is it possible i need to use an ecu from an automatic integra instead of a 5 spd since i still am running my auto dx tranny?
is it possible i need to use an ecu from an automatic integra instead of a 5 spd since i still am running my auto dx tranny?
10-10-2003, 11:15 AM
#4
0.5 BAR
Thread Starter
Join Date: Apr 2003
Posts: 52
Re:ZC nad DX Automatics!!!HELP!!!!!
well the only coeds that i keep gettin are for the cylinder position sensor on the exhast cam shaft part of the motor but other than that the car runs fine just ic has no pickup whatsoever..
10-10-2003, 12:23 PM
#6
0.5 BAR
Thread Starter
Join Date: Apr 2003
Posts: 52
Re:ZC nad DX Automatics!!!HELP!!!!!
thanx for the info however i get the code no matter which way the wires a r hooked up but it will only crank and run one way .. so i think the wires a r hooked up right its just throwing a code for some reason.. or maybe the sensor could be bad but i already replaced it.. or it could be a matter of i am using the wrong ecu
10-10-2003, 12:41 PM
#7
0.0 BAR
Join Date: Jan 2003
Posts: 32
Re:ZC nad DX Automatics!!!HELP!!!!!
Ya thats wierd... ecu i would think would have issues with an auto tranny. but those wires he had backwards, the car still ran either way. so i dunno if we r talking bout the same wires. We did his swap into a si tho. ill pop by his work and double check the location and etc...
