Z6 dizzy work with PR4 ecu

Reply Subscribe

Thread Tools

Search this Thread

11-28-2004, 08:25 PM

crxrx7

3.0 BAR

Thread Starter

Join Date: Sep 2003

Posts: 1,752

Z6 dizzy work with PR4 ecu

thats what I need to know. I have it all wired up I just don't want to fry anything.

11-28-2004, 10:15 PM

Guy-Fast

0.0 BAR

Join Date: Dec 2002

Posts: 0

Re:Z6 dizzy work with PR4 ecu

what year pr4 and what car?

11-29-2004, 07:13 PM

HMT-Admin

Administrator

Join Date: Dec 2002

Posts: 13,991

Re:Z6 dizzy work with PR4 ecu

If its a 90-91 OBD0 PR4 ecu its not going to run right with a OBD1 z6 distributor.

11-29-2004, 10:22 PM

crxrx7

3.0 BAR

Thread Starter

Join Date: Sep 2003

Posts: 1,752

Re:Z6 dizzy work with PR4 ecu

will the z6 dizzy work with any obd0 ecu

11-29-2004, 11:16 PM

HMT-Admin

Administrator

Join Date: Dec 2002

Posts: 13,991

Re:Z6 dizzy work with PR4 ecu

Nope

16 tooth count on obd0 and 24 on obd1

12-01-2004, 08:04 PM

crxrx7

3.0 BAR

Thread Starter

Join Date: Sep 2003

Posts: 1,752

Re:Z6 dizzy work with PR4 ecu

whats 16 tooth and 24 tooth on what?

12-01-2004, 10:11 PM

B16MIKE

1.0 BAR

Join Date: Jul 2003

Posts: 629

Re:Z6 dizzy work with PR4 ecu

inside the dizzy there is a wheel behind the rotor.it has teeth.if you dont use the correct one the timing and spark will be off big time.it will damage the motor if it will even start and idel.

12-01-2004, 10:16 PM

crxrx7

3.0 BAR

Thread Starter

Join Date: Sep 2003

Posts: 1,752

Re:Z6 dizzy work with PR4 ecu

So anther words don't even try to start the car? Cuz I have been trying. I will stop.

12-01-2004, 10:24 PM

Guy-Fast

0.0 BAR

Join Date: Dec 2002

Posts: 0

Re:Z6 dizzy work with PR4 ecu

IT WONT WORK!

12-01-2004, 10:40 PM

#10

Honda16hb

3.0 BAR

Join Date: Jan 2003

Posts: 7,082

Re:Z6 dizzy work with PR4 ecu

[IMG width=600 height=450]http://img88.exs.cx/img88/3671/38-DSC00467.jpg[/IMG]
left if obd0, right is obd1. the reluctor wheel on obd0 is the top one and the reluctor wheel on obd1 is the middle one. you can't switch that middle section between distributor bodies either, I tried. obd1 is slightly taller by about 2mm and the bigger reluctor wheel doesn't let it fit inside the obd0 shell.

right click on the picture and select properties, then copy the image address and look at it in an explorer window to see the full size picture with more detail, it's a pretty big picture.