Z6 dizzy work with PR4 ecu
 

thats what I need to know. I have it all wired up I just don't want to fry anything.

Re:Z6 dizzy work with PR4 ecu
 

what year pr4 and what car?

Re:Z6 dizzy work with PR4 ecu
 

If its a 90-91 OBD0 PR4 ecu its not going to run right with a OBD1 z6 distributor.

Re:Z6 dizzy work with PR4 ecu
 

will the z6 dizzy work with any obd0 ecu

Re:Z6 dizzy work with PR4 ecu
 

Nope

16 tooth count on obd0 and 24 on obd1

Re:Z6 dizzy work with PR4 ecu
 

whats 16 tooth and 24 tooth on what?

Re:Z6 dizzy work with PR4 ecu
 

inside the dizzy there is a wheel behind the rotor.it has teeth.if you dont use the correct one the timing and spark will be off big time.it will damage the motor if it will even start and idel.

Re:Z6 dizzy work with PR4 ecu
 

So anther words don't even try to start the car? Cuz I have been trying. I will stop. :-X

Re:Z6 dizzy work with PR4 ecu
 

IT WONT WORK!

Re:Z6 dizzy work with PR4 ecu
 

[IMG width=600 height=450]http://img88.exs.cx/img88/3671/38-DSC00467.jpg[/IMG]
left if obd0, right is obd1. the reluctor wheel on obd0 is the top one and the reluctor wheel on obd1 is the middle one. you can't switch that middle section between distributor bodies either, I tried. obd1 is slightly taller by about 2mm and the bigger reluctor wheel doesn't let it fit inside the obd0 shell.

right click on the picture and select properties, then copy the image address and look at it in an explorer window to see the full size picture with more detail, it's a pretty big picture.