Iīve used the camgears ajutement and the best I could do was 135 Whp. Crx88si about the "old setup" program, thats what I think its ------- up everything cause I donīt know were did he got it and it was installed before the current setup (without the cams, flywhell etc) and the car was running great. I donīt think its the timing in the cams... I almost could bet that its the ECU, I just wanted you guys opinion cause youīr more experient and so on :P Iīve told the guy to bring his Original ECU to give it a try, it doesnīt mean it will run good (I know it wonīt) bu its just to look at some diferences and if it is iīll have someone make a new costum map for him.

(I have all the tools to burn chips and ---- but I dont have experience yet to tune maps and still waiting for my wideband)

Thanks guys!

Hereīs some pics

 

Does he have a adjustable fpr. Tune the old school way reading plugs. Not the best but it works. Turn up the fuel and see what happens.

 

Iīll try that and keep you posted. thanks guys.

 

its the spoiler. the car doesnt like it so it wont run right. its the cars way of giving him the finger :P.

 

maybe the "port & polished" head is the problem. or maybe somebody ripped him off and sold him stock cams instead of stage 3's... or maybe the engine is a piece of poo poo...

 

Nop. The port and polish was made by us and its been done several times and worked real well. The cams were bought from omnipower and the are very diferent than the stock ones. The engine got all new bearings, new head gasket and several other stuff. Thatīs not the problem for sure.