Wondering about d15 vitatra
I am wondering if the Vitaras will fit in a d15b. I had heard that they couldn't but then someone posted on here saying it was done, no questions were answered about it so I assumed it was a lie. Has anyone heard about this?
|
Re: Wondering about d15 vitatra
yes they work fine in the d15b vtec. The stick up slightly but the clearance is okay.
|
Re: Wondering about d15 vitatra
1 Attachment(s)
|
Re: Wondering about d15 vitatra
A stock headgasket makes up for it no problem. Just be careful if you deck the block. |
Re: Wondering about d15 vitatra
you have pictures of your block went built madmax?
|
Re: Wondering about d15 vitatra
Originally Posted by whiterice
you have pictures of your block went built madmax?
Sadly, I didn't take pics. |
Re: Wondering about d15 vitatra
you can't run them with a Y8 head......they will kiss the head, Z6/B7 head and they will be fine.
Or just have .020" taken off the pistons, a table top belt sander will work :) |
Re: Wondering about d15 vitatra
Originally Posted by Mista Bone
you can't run them with a Y8 head......they will kiss the head, Z6/B7 head and they will be fine.
Or just have .020" taken off the pistons, a table top belt sander will work :) wont that weeken the piston ? |
Re: Wondering about d15 vitatra
the vitaras have a very large ringlands. bigger than stock hondas
|
Re: Wondering about d15 vitatra
Originally Posted by Mista Bone
you can't run them with a Y8 head......they will kiss the head, Z6/B7 head and they will be fine.
Or just have .020" taken off the pistons, a table top belt sander will work :) The Y8 head is fine. With the stock headgasket there is enough clearance so they don't even rise above the headgasket surface. |
All times are GMT -5. The time now is 01:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands