Wondering about d15 vitatra
06-22-2007, 01:05 AM
#1
0.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 36
Wondering about d15 vitatra
I am wondering if the Vitaras will fit in a d15b. I had heard that they couldn't but then someone posted on here saying it was done, no questions were answered about it so I assumed it was a lie. Has anyone heard about this?
06-22-2007, 12:23 PM
#8
3.0 BAR
Join Date: Apr 2005
Posts: 4,890
Re: Wondering about d15 vitatra
Originally Posted by Mista Bone
you can't run them with a Y8 head......they will kiss the head, Z6/B7 head and they will be fine.
Or just have .020" taken off the pistons, a table top belt sander will work
Or just have .020" taken off the pistons, a table top belt sander will work
wont that weeken the piston ?
06-22-2007, 06:55 PM
#10
0.0 BAR
Join Date: May 2005
Posts: 0
Re: Wondering about d15 vitatra
Originally Posted by Mista Bone
you can't run them with a Y8 head......they will kiss the head, Z6/B7 head and they will be fine.
Or just have .020" taken off the pistons, a table top belt sander will work
Or just have .020" taken off the pistons, a table top belt sander will work
The Y8 head is fine. With the stock headgasket there is enough clearance so they don't even rise above the headgasket surface.
