turbohf

what would the compression ratio be on a D16A6 with a Z6 head (with a 92-to whatever metal headgasket)?
is this a pretty strait forward swap? just pull the A6 head and put the Z6 head on (cleaning everything of course)? any mods needed? i heard you have to do something to the dizzy to make it work right? thanks...

dizogg

people have talked about this swap a number of times.. read.. they say 10:1:1 and yes u can make the dist work u just have to put the bolts in so the washers help hold the dist on they dont acually go through the holes in the dist.. also u need to take the oil jet out of ur 1.6 or 1.5 block so the oil get through when the vtec kicks in or it wont work.. i suggest checkin out this page...
http://crx.honda-perf.org/articles/z6swap/z6swap.html

turbohf

coo thanks! and i have searched keep finding crap...

dizogg

n.p i just did a mini me on my crx and this is what i used... just gotta make sure the coil is pointin up on the dist when u rig it up in there.. #1 should be bottom left then...