Water temp????
 

I have a sunpro water temp. gauge and I cant figure where to put it except the radiator and the bottom....and it wont read the temp that way....if I stick it though the top while running it goes to 160 degrees
Is there any spots on the back of the block that i can put it?

Re: Water temp????
 

Its a 1st gen B16a

Re: Water temp????
 

i always just tapped into a water line if its a mechanical unit.

Re: Water temp????
 

tapped into a water line??
can you give me any pointers on where??
i may be overlookin the simple ---- here ::)

Re: Water temp????
 

um a water hose that your not using like for the heater core etc

Re: Water temp????
 

I just removed the sensor for the stock temp gauge and put the new sender there. Or if you want to keep the stock one working you could probably T into that spot on the head.

Re: Water temp????
 

on D sluts.......

Attachment 25660

Re: Water temp????
 

on the b series it needs to be drilled and tapped.

Re: Water temp????
 

Iunno why it wont work on the bottom of the radiator.....
theres a bung there where you can drain it....and the sensor thingy screws right in there.....
it just doesnt read the tempature doen there

Re: Water temp????
 

Im using my heater hoses.....isnt the tempature sensor on the back of the block?? the 2 little prongs that stick out....or the single one??