Re:vitara pistons
 

anyone have the link to what you need to do to get the ls rods to fit in are d16's? to lazy to search ;)

Re:vitara pistons
 

http://www.hstuners.com/forums/showt...threadid=16805[

Re:vitara pistons
 

i did my own research on these pistons and found out they are not forged, they are cast aluminum, i even found out that a GEO tracker all years and even chey tracker 97 and up all have the same size bore as any D series, also same size wrist pin, but only if they were forged.... but they have a very low compression when mixxing them with the D series. i am still very intrested in this though....

Re:vitara pistons
 

sooo...suzuki actually has something of value out there besides the gsxr? lol. interesting idea using the vitara's pistons...

-cody

Re:vitara pistons
 

but the CR seems kinda low...8.5???




What if you mill your head?would that help?also would a d16z6 ryn crappy with that compresion?

Re:vitara pistons
 

Not if you wanna run larger amounts of boost ;D The lower the better. And besides...an early 90's accord f22 has pretty much that c/r anyway, and they run just fine ::)

Re:vitara pistons
 

i think thats the reason y they can handle so much boost.

Re:vitara pistons
 

I dont get it, Y7 pistons will give u about 8.5:1 too with a Z6 head and are cast. So might as well stay Honda... or in my case I scored a Y7 block in the junkyard with 20k miles.

I will say though that my car is a HUGE pig out of the hole, i regret 8.5:1 every day I romp on it.

Just doesnt seem worth the effort unless you're going to replace the rods, which in that case you'd prolly want more than 8.5:1 anyway since you can handle it!

Re:vitara pistons
 

i know what you mean, i went from 10.5 compression to 9 flat and my car just sucks at the low end.

Re:vitara pistons
 

I keep seeing the words "viagra piston" when I look thru the forum. Thought I'd post my dillusions.