Vitara piston installation Info
11-10-2008, 12:34 AM
#11
0.0 BAR
Join Date: Dec 2005
Location: Casper Wyo.
Posts: 0
Re: Vitara piston installation Info
According to FJT : https://www.homemadeturbo.com/forum/...?topic=95223.0 Arrow towards the timing belt.
If you use 75.5mm bore pistons run 0.003 to 0.0035 pist. to wall clearance and you'll have low amount of piston slap.
If you use 75.5mm bore pistons run 0.003 to 0.0035 pist. to wall clearance and you'll have low amount of piston slap.
11-10-2008, 12:44 AM
#12
3.0 BAR
Thread Starter
Join Date: Jul 2006
Posts: 2,349
Re: Vitara piston installation Info
Originally Posted by 92CXyD
According to FJT : https://www.homemadeturbo.com/forum/...?topic=95223.0 Arrow towards the timing belt.
If you use 75.5mm bore pistons run 0.003 to 0.0035 pist. to wall clearance and you'll have low amount of piston slap.
If you use 75.5mm bore pistons run 0.003 to 0.0035 pist. to wall clearance and you'll have low amount of piston slap.
I built my motor this way and it will be running very shorty.
Im just stating my Educated opinion By showing information which I have found.
Thread
Thread Starter
Forum
Replies
Last Post
