|
Re: very noob question about timeing, be gentle
Originally Posted by Anubis_4_99
very helpfull
|
Re: very noob question about timeing, be gentle
Originally Posted by Anubis_4_99
very helpfull
i got the timeing dialed in (thanks ::)) and im still haveing my same problems my AFR's wont change no matter what changes i make to the map, at idle its 10 or below and above 2500-3500 it cuts out because its damn near 16 i tried datalogging while running but i cant seem to get that to work right quite yet... anyone have any ideas? if i cant get this thing figured out soon im just gonna sell it because i cant not have a DD for much longer Do you have a CEL? What is your setup? |
Re: very noob question about timeing, be gentle
are you using some sort of emulator or just burning chips?
if emulating, are you sure the changes you're making are being uploaded? |
Re: very noob question about timeing, be gentle
Originally Posted by MADMAX
Do you have a CEL? What is your setup? my setup is below D16Z6, stock CR ported and polished head eagle rods vitara pistons block decked .025 ACL bearings garret T3/T4 50/63 with HPC coating PO6 converted to v-tec chipped by xenocron (chips he sent must have got damaged during shipping or something, so i've been trying to make my own map) RC550 injectors new adjustable FPR at 45psi for now (old fuel pressure was 60) i dont have an emulator, i bought a moates burn1 from xeno and some chips from moates and have been trying to sort it out on my own.. i know the maps make it onto the chips because i verify before i even try them in the ecu i've got my timeing dialed in and verified with a timeing light, about 4 times any map i make seems to idle around 10.0 and any changes i make dont seem to matter i've had it driveing for about 3 minutes but it was popping and pretty lean so i stopped, and i cant get it to build boost either anytime i get it semi driveable... but im not as worried about that just yet |
Re: very noob question about timeing, be gentle
Are you sure your wideband is working right. It could be some crazy voltage deal or a bad sensor.
|
Re: very noob question about timeing, be gentle
im pretty sure its working right, i dont really have a way to test it... i bought it brand new so unless it was faulty from the shop then it should be good to go
|
| All times are GMT -5. The time now is 02:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands