TurbodEG

where can i find a write up on it...i'm comfused

FooK

unscrew the old one, screw the new one on, twist it back and forth both at WOT and throttle closed while monitoring it with a voltmeter to get it twisted to the proper spot before you tighten it down.

see the DIY ITB tech project article to your left to get pics and voltage ranges.

TurbodEG

i got the code 7(tps) to go away...now i have a code 41...o2 sensor heater...what do i do

FooK

fix the o2 sensor.

TurbodEG

so just change it...

and how do u install the tps sensor? not how do u set it...but how do u install it

con

TurbodEG

that doesn't tell me what to do when i install it with the whole turning thing

Guy-Fast

give it tension you will feel it there


Then bust out the multimeter and check voltage at idle and wot

TurbodEG

i mean do i need the butterfly to be wide open or closed? if closed, do i put the little nipple part inbetween the opening on the intake manifold and then turn it until it can bolt down? or what