tps install?
where can i find a write up on it...i'm comfused :(
|
Re: tps install?
unscrew the old one, screw the new one on, twist it back and forth both at WOT and throttle closed while monitoring it with a voltmeter to get it twisted to the proper spot before you tighten it down.
see the DIY ITB tech project article to your left to get pics and voltage ranges. |
Re: tps install?
i got the code 7(tps) to go away...now i have a code 41...o2 sensor heater...what do i do
|
Re: tps install?
Masturbation is key at this point.
|
Re: tps install?
Originally Posted by TurbodEG
i got the code 7(tps) to go away...now i have a code 41...o2 sensor heater...what do i do
|
Re: tps install?
so just change it...
and how do u install the tps sensor? not how do u set it...but how do u install it |
Re: tps install?
Originally Posted by FooK
unscrew the old one, screw the new one on
|
Re: tps install?
Originally Posted by highroller54
::)
http://img73.imageshack.us/img73/213/459ft.jpg |
Re: tps install?
give it tension you will feel it there
Then bust out the multimeter and check voltage at idle and wot |
Re: tps install?
i mean do i need the butterfly to be wide open or closed? if closed, do i put the little nipple part inbetween the opening on the intake manifold and then turn it until it can bolt down? or what
|
All times are GMT -5. The time now is 07:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands