necro

I got a jdm d15 vtec motor and i'm going to bore the intake mani to a 65mm and i got a ls throttle body from a friend, but i wanted to know can the tb could be bored to 65mm also? Or should i hunt for a integra type r tb? I also heard a mustang tb would be able to fit. Which direction could i take for the best results.

Yes i did a search but came up empty. I wanted to keep this at a budget. Thanks for any help.

88crxSi

have you looked into used aftermarket?

necro

Ya but some places are asking close to $300 just for a tb. That's to much for a tb and the hp is not worth the $.

88crxSi

how about a used aftermarket? (like i said before USED)

necro

Well i'll take it if someone has one for sale. If u do have one i'll take it.

W O T

Ive got a 64mm JG A6 t/b, picked it up in a deal but it was cheap

Probably would have worked out to about $70

88crxSi

if its MEANT for an a6 intake manifold it wont fit onto a 92+ manifold (jdm, d15b vtec is 92+)

Guy-Fast

also you cant bore the a6 throttle body to 64 mm. The plate size can only go to 60 mm. The tb can be bored to 64 mm tb. I do throttle body boring if intrested pm me

HMT-Admin

ohhh.. look at this guy ^^^ offering his services!!!

necro

I got the I.M. bored to 63mm, so i'm gonna keep the ls t/b stock b/c it's 60mm. But i might consider boring the t/b in a few weeks.