Throttle body confussion
 

I got a jdm d15 vtec motor and i'm going to bore the intake mani to a 65mm and i got a ls throttle body from a friend, but i wanted to know can the tb could be bored to 65mm also? Or should i hunt for a integra type r tb? I also heard a mustang tb would be able to fit. Which direction could i take for the best results.

Yes i did a search but came up empty. I wanted to keep this at a budget. Thanks for any help.

Re:Throttle body confussion
 

have you looked into used aftermarket?

Re:Throttle body confussion
 

Ya but some places are asking close to $300 just for a tb. That's to much for a tb and the hp is not worth the $.

Re:Throttle body confussion
 

how about a used aftermarket? (like i said before USED) ;)

Re:Throttle body confussion
 

Well i'll take it if someone has one for sale. If u do have one i'll take it.

Re:Throttle body confussion
 

Ive got a 64mm JG A6 t/b, picked it up in a deal but it was cheap

Probably would have worked out to about $70

Re:Throttle body confussion
 

if its MEANT for an a6 intake manifold it wont fit onto a 92+ manifold (jdm, d15b vtec is 92+)

Re:Throttle body confussion
 

also you cant bore the a6 throttle body to 64 mm. The plate size can only go to 60 mm. The tb can be bored to 64 mm tb. I do throttle body boring if intrested pm me

Re:Throttle body confussion
 

ohhh.. look at this guy ^^^ offering his services!!! :-X



;)

Re:Throttle body confussion
 

I got the I.M. bored to 63mm, so i'm gonna keep the ls t/b stock b/c it's 60mm. But i might consider boring the t/b in a few weeks.